Actiontec Router Login

Default IP, username & password · Updated

Quick answer

To log in to an Actiontec router, connect to its network and open http://192.168.0.1 in a browser. The default login is username "admin" and password "password". Some Actiontec models use 192.168.1.1 instead. Model-specific logins for 3 Actiontec routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Actiontec gateway, connect to its network and open http://192.168.0.1 in your browser. The default username is admin and the default password is password. Some Actiontec models use 192.168.1.1 instead.

How to log in to your Actiontec router

  1. Connect to your Actiontec network. Join the Actiontec Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.0.1.
  3. Sign in. Enter the username admin and password password. If these do not work, check the label on the bottom of your Actiontec router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Actiontec default passwords by model

ModelIP addressUsernamePassword
C1000A192.168.0.1adminpassword
MI424WR192.168.1.1adminpassword
T3200192.168.0.1adminpassword

More Actiontec default credentials (3)

Additional factory logins for Actiontec equipment (including older, business and ISP models) from the CIRT.net default password database:

UsernamePasswordNotes
(blank)(blank)—
adminpasswordVerizon Fios Setup
adminadmin—

IP addresses used by Actiontec

Change the Wi-Fi password on a Actiontec router

  1. Log in at http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Actiontec router to factory settings

If you forgot the Actiontec admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / password at 192.168.0.1. Read the full guide.

Actiontec router login FAQ

What is the default IP address for Actiontec routers?

Most Actiontec routers use 192.168.0.1; some models use 192.168.1.1.

What is the default Actiontec router username and password?

Username: admin, password: password. Some models and ISP versions use a unique password printed on the label.

How do I reset my Actiontec router?

With the Actiontec router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.0.1 with admin / password.

How do I change the Wi-Fi password on a Actiontec router?

Log in at http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.