D-Link Router Login

Default IP, username & password · Updated

Quick answer

To log in to a D-Link router, connect to its network and open http://dlinkrouter.local in a browser (or the default IP 192.168.0.1). The default login is username "admin" and password blank (leave it empty). Some D-Link models use 192.168.1.1 and 10.0.0.1 instead. Model-specific logins for 11 D-Link routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a D-Link router, connect to its network and open http://dlinkrouter.local or http://192.168.0.1 in your browser. The default username is admin and the default password is (blank). Some D-Link models use 192.168.1.1 or 10.0.0.1 instead.

Most D-Link routers ship with the username admin and an empty password.

How to log in to your D-Link router

  1. Connect to your D-Link network. Join the D-Link Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://dlinkrouter.local or http://192.168.0.1.
  3. Sign in. Enter the username admin and password (blank). If these do not work, check the label on the bottom of your D-Link router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

D-Link default passwords by model

ModelIP addressUsernamePassword
COVR-1102192.168.0.1admin(blank)
DIR-600192.168.0.1admin(blank)
DIR-615192.168.0.1admin(blank)
DIR-819192.168.0.1admin(blank)
DIR-825192.168.0.1admin(blank)
DIR-842192.168.0.1admin(blank)
DIR-859192.168.0.1admin(blank)
DIR-878192.168.0.1admin(blank)
DIR-882192.168.0.1admin(blank)
DIR-X1560192.168.0.1admin(blank)
DSL-2750U192.168.1.1adminadmin

More D-Link default credentials (19)

Additional factory logins for D-Link equipment (including older, business and ISP models) from the CIRT.net default password database:

UsernamePasswordNotes
(blank)admin—
(blank)private—
(blank)public—
Admin(blank)—
Alphanetworkswrgg15_di524—
D-LinkD-Link—
admin(blank)—
adminadmin—
admingvt12345—
adminnone—
adminpasswordhardcoded for Verizon FiOS
adminpublic—
adminyear2000—
dont need oneadmin—
nonenone—
noneprivate—
rootadmin—
user(blank)by rootkid
usernone—

IP addresses used by D-Link

Change the Wi-Fi password on a D-Link router

  1. Log in at http://dlinkrouter.local or http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a D-Link router to factory settings

If you forgot the D-Link admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / (blank) at 192.168.0.1. Read the full guide.

D-Link router login FAQ

What is the default IP address for D-Link routers?

Most D-Link routers use 192.168.0.1; some models use 192.168.1.1, 10.0.0.1. You can also use dlinkrouter.local.

What is the default D-Link router username and password?

Username: admin, password: (blank). Most D-Link routers ship with the username admin and an empty password.

How do I reset my D-Link router?

With the D-Link router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at dlinkrouter.local with admin / (blank).

How do I change the Wi-Fi password on a D-Link router?

Log in at http://dlinkrouter.local or http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.