TP-Link Router Login

Default IP, username & password · Updated

Quick answer

To log in to a TP-Link router, connect to its network and open http://tplinkwifi.net in a browser (or the default IP 192.168.0.1). The default login is username "admin" and password "admin". Some TP-Link models use 192.168.1.1 and 192.168.0.254 instead. Model-specific logins for 16 TP-Link routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a TP-Link router, connect to its network and open http://tplinkwifi.net or http://192.168.0.1 in your browser. The default username is admin and the default password is admin. Some TP-Link models use 192.168.1.1 or 192.168.0.254 instead.

Newer TP-Link firmware asks you to create an admin password on first login instead of using admin/admin.

How to log in to your TP-Link router

  1. Connect to your TP-Link network. Join the TP-Link Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://tplinkwifi.net or http://192.168.0.1.
  3. Sign in. Enter the username admin and password admin. If these do not work, check the label on the bottom of your TP-Link router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

TP-Link default passwords by model

ModelIP addressUsernamePassword
Archer AX10192.168.0.1admin(created during first setup)
Archer AX20192.168.0.1admin(created during first setup)
Archer AX55192.168.0.1admin(created during first setup)
Archer AX73192.168.0.1admin(created during first setup)
Archer C50192.168.0.1adminadmin
Archer C6192.168.0.1adminadmin
Archer C7192.168.0.1adminadmin
Archer C80192.168.0.1adminadmin
Archer MR600192.168.1.1adminadmin
Deco M4192.168.68.1(blank)(created during first setup)
Deco X20192.168.68.1(blank)(created during first setup)
TL-MR6400192.168.1.1adminadmin
TL-WR840N192.168.0.1adminadmin
TL-WR841N192.168.0.1adminadmin
TL-WR850N192.168.0.1adminadmin
TL-WR940N192.168.0.1adminadmin

IP addresses used by TP-Link

Change the Wi-Fi password on a TP-Link router

  1. Log in at http://tplinkwifi.net or http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a TP-Link router to factory settings

If you forgot the TP-Link admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / admin at 192.168.0.1. Read the full guide.

TP-Link router login FAQ

What is the default IP address for TP-Link routers?

Most TP-Link routers use 192.168.0.1; some models use 192.168.1.1, 192.168.0.254. You can also use tplinkwifi.net.

What is the default TP-Link router username and password?

Username: admin, password: admin. Newer TP-Link firmware asks you to create an admin password on first login instead of using admin/admin.

How do I reset my TP-Link router?

With the TP-Link router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at tplinkwifi.net with admin / admin.

How do I change the Wi-Fi password on a TP-Link router?

Log in at http://tplinkwifi.net or http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.