Mercusys Router Login
Default IP, username & password · Updated
To log in to a Mercusys router, connect to its network and open http://mwlogin.net in a browser (or the default IP 192.168.1.1). The default login is username blank (leave it empty) and password created during first setup. Model-specific logins for 6 Mercusys routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.
- Default IP
- 192.168.1.1
- Username
(blank)- Password
(created during first setup)- Login URL
- mwlogin.net
To log in to a Mercusys router, connect to its network and open http://mwlogin.net or http://192.168.1.1 in your browser. The default username is (blank) and the default password is (created during first setup).
Mercusys routers ask you to create a login password the first time you open mwlogin.net.
How to log in to your Mercusys router
- Connect to your Mercusys network. Join the Mercusys Wi-Fi network or connect with an Ethernet cable.
- Open the login page. Open a browser and go to http://mwlogin.net or http://192.168.1.1.
- Sign in. Enter the username (blank) and password (created during first setup). If these do not work, check the label on the bottom of your Mercusys router.
- Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.
Mercusys default passwords by model
| Model | IP address | Username | Password |
|---|---|---|---|
| AC10 | 192.168.1.1 | (blank) | (created during first setup) |
| AC12G | 192.168.1.1 | (blank) | (created during first setup) |
| Halo H30G | 192.168.1.1 | (blank) | (created during first setup) |
| MR70X | 192.168.1.1 | (blank) | (created during first setup) |
| MW301R | 192.168.1.1 | (blank) | (created during first setup) |
| MW325R | 192.168.1.1 | (blank) | (created during first setup) |
IP addresses used by Mercusys
Change the Wi-Fi password on a Mercusys router
- Log in at
http://mwlogin.net or http://192.168.1.1. - Go to the Wireless / Wi-Fi settings.
- Select WPA2 or WPA3 and type a new password.
- Save and reconnect your devices.
Reset a Mercusys router to factory settings
If you forgot the Mercusys admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with (blank) / (created during first setup) at 192.168.1.1. Read the full guide.
Mercusys router login FAQ
What is the default IP address for Mercusys routers?
Most Mercusys routers use 192.168.1.1. You can also use mwlogin.net.
What is the default Mercusys router username and password?
Username: (blank), password: (created during first setup). Mercusys routers ask you to create a login password the first time you open mwlogin.net.
How do I reset my Mercusys router?
With the Mercusys router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at mwlogin.net with (blank) / (created during first setup).
How do I change the Wi-Fi password on a Mercusys router?
Log in at http://mwlogin.net or http://192.168.1.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.