Tenda Router Login

Default IP, username & password · Updated

Quick answer

To log in to a Tenda router, connect to its network and open http://tendawifi.com in a browser (or the default IP 192.168.0.1). The default login is username "admin" and password "admin". Model-specific logins for 8 Tenda routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Tenda router, connect to its network and open http://tendawifi.com or http://192.168.0.1 in your browser. The default username is admin and the default password is admin.

Newer Tenda models have no default password; log in at tendawifi.com and set one.

How to log in to your Tenda router

  1. Connect to your Tenda network. Join the Tenda Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://tendawifi.com or http://192.168.0.1.
  3. Sign in. Enter the username admin and password admin. If these do not work, check the label on the bottom of your Tenda router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Tenda default passwords by model

ModelIP addressUsernamePassword
AC10192.168.0.1adminadmin
AC1200192.168.0.1adminadmin
AC6192.168.0.1adminadmin
F3192.168.0.1adminadmin
F6192.168.0.1adminadmin
N301192.168.0.1adminadmin
Nova MW6192.168.5.1(blank)(created during first setup)
TX3192.168.0.1adminadmin

IP addresses used by Tenda

Change the Wi-Fi password on a Tenda router

  1. Log in at http://tendawifi.com or http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Tenda router to factory settings

If you forgot the Tenda admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / admin at 192.168.0.1. Read the full guide.

Tenda router login FAQ

What is the default IP address for Tenda routers?

Most Tenda routers use 192.168.0.1. You can also use tendawifi.com.

What is the default Tenda router username and password?

Username: admin, password: admin. Newer Tenda models have no default password; log in at tendawifi.com and set one.

How do I reset my Tenda router?

With the Tenda router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at tendawifi.com with admin / admin.

How do I change the Wi-Fi password on a Tenda router?

Log in at http://tendawifi.com or http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.