Ubiquiti Router Login

Default IP, username & password · Updated

Quick answer

To log in to an Ubiquiti router, connect to its network and open http://192.168.1.1 in a browser. The default login is username "ubnt" and password "ubnt". Some Ubiquiti models use 192.168.1.20 instead. Model-specific logins for 7 Ubiquiti routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Ubiquiti router, connect to its network and open http://192.168.1.1 in your browser. The default username is ubnt and the default password is ubnt. Some Ubiquiti models use 192.168.1.20 instead.

EdgeRouter and older UniFi gear use ubnt/ubnt; UniFi OS consoles are set up through the UniFi app or setup.ui.com.

How to log in to your Ubiquiti router

  1. Connect to your Ubiquiti network. Join the Ubiquiti Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.1.1.
  3. Sign in. Enter the username ubnt and password ubnt. If these do not work, check the label on the bottom of your Ubiquiti router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Ubiquiti default passwords by model

ModelIP addressUsernamePassword
AmpliFi HD192.168.114.1(blank)(created during first setup)
EdgeRouter Lite192.168.1.1ubntubnt
EdgeRouter X192.168.1.1ubntubnt
NanoStation M5192.168.1.20ubntubnt
UniFi Dream Machine192.168.1.1(blank)(created during first setup)
UniFi Express192.168.1.1(blank)(created during first setup)
UniFi Security Gateway192.168.1.1ubntubnt

IP addresses used by Ubiquiti

Change the Wi-Fi password on a Ubiquiti router

  1. Log in at http://192.168.1.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Ubiquiti router to factory settings

If you forgot the Ubiquiti admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with ubnt / ubnt at 192.168.1.1. Read the full guide.

Ubiquiti router login FAQ

What is the default IP address for Ubiquiti routers?

Most Ubiquiti routers use 192.168.1.1; some models use 192.168.1.20.

What is the default Ubiquiti router username and password?

Username: ubnt, password: ubnt. EdgeRouter and older UniFi gear use ubnt/ubnt; UniFi OS consoles are set up through the UniFi app or setup.ui.com.

How do I reset my Ubiquiti router?

With the Ubiquiti router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.1.1 with ubnt / ubnt.

How do I change the Wi-Fi password on a Ubiquiti router?

Log in at http://192.168.1.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.