Arris Router Login

Default IP, username & password · Updated

Quick answer

To log in to an Arris router, connect to its network and open http://192.168.0.1 in a browser. The default login is username "admin" and password "password". Some Arris models use 192.168.100.1 instead. Model-specific logins for 6 Arris routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Arris modem / gateway, connect to its network and open http://192.168.0.1 in your browser. The default username is admin and the default password is password. Some Arris models use 192.168.100.1 instead.

Arris SURFboard modems use 192.168.100.1; Arris gateways with Wi-Fi use 192.168.0.1.

How to log in to your Arris router

  1. Connect to your Arris network. Join the Arris Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.0.1.
  3. Sign in. Enter the username admin and password password. If these do not work, check the label on the bottom of your Arris router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Arris default passwords by model

ModelIP addressUsernamePassword
SBG6580192.168.0.1adminpassword
SBG7600192.168.0.1adminpassword
SURFboard SB6183192.168.100.1adminpassword
SURFboard SB8200192.168.100.1adminpassword
TG1672G192.168.0.1adminpassword
TG3452192.168.0.1adminpassword

IP addresses used by Arris

Change the Wi-Fi password on a Arris router

  1. Log in at http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Arris router to factory settings

If you forgot the Arris admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / password at 192.168.0.1. Read the full guide.

The complete Arris router guide

What an Arris router login gives you access to

An Arris router login opens the local admin page for your modem or gateway, where you can check connection status, Wi-Fi settings, LAN settings, and device lists. On Arris hardware, this is usually a local web page at 192.168.0.1 for Wi-Fi gateways or 192.168.100.1 for SURFboard modems that do not provide Wi-Fi routing features.

This page is the control panel for your home network, not the internet service itself. The router or gateway runs a DHCP server, which hands out private IP addresses like 192.168.0.x to your devices, and it may also handle NAT. NAT, short for Network Address Translation, lets many devices share one public internet connection while staying on a private network behind the router.

Router, modem, and gateway are not the same thing

A modem connects your home to your ISP over cable or fiber infrastructure. A router connects your devices to each other and to the internet. A gateway combines both jobs in one box.

Arris sells both standalone SURFboard modems and gateways with built-in Wi-Fi. That difference matters because it changes the login address and the features you'll see after signing in. If you are not sure which device you have, compare the model name on the sticker to the model list on this page and check the matching login IP.

The network terms you'll see in the Arris interface

Inside the admin page, you'll usually see the SSID, which is the name of your Wi-Fi network, the MAC address, which is the hardware identifier for each network interface, and the subnet mask, which tells devices what part of an IP address belongs to the local network. You may also see DNS settings, where DNS means Domain Name System, the service that turns names like example.com into IP addresses.

If you want a quick refresher on local addressing, our internal IP address index and default gateway guide explain how these pieces fit together.

Which Arris IP address should you use

The correct login IP depends on the type of Arris device you own. Most Arris gateways with Wi-Fi use 192.168.0.1, while many Arris SURFboard modems use 192.168.100.1 for status and management. Using the wrong address is one of the most common reasons the login page does not open.

Device type Typical Arris IP What it usually means
SURFboard modem 192.168.100.1 Modem status page, limited admin options
Wi-Fi gateway 192.168.0.1 Full local admin page with Wi-Fi settings
Other home routers Varies by brand Check the sticker, manual, or the gateway address used by DHCP

If you want a broader reference for router addresses, see the default router IP address list. For Arris-specific models, the 192.168.0.1 login guide and 192.168.100.1 login guide are useful cross-checks.

Why the same brand uses two different addresses

Arris does this because different products have different roles on the network. A modem that only bridges your ISP connection often uses a management IP in the 192.168.100.x range. A gateway that includes routing and Wi-Fi needs a local admin IP on the home network, which is often 192.168.0.1.

Your device may also hand out a different LAN range if another router is attached behind it. In that case, the default gateway on your computer can point to a different device, even though the Arris box is still connected.

How to log in to an Arris router from any device

You log in to an Arris router by connecting to its network, opening the correct IP address in a browser, and entering the local admin username and password shown in the table on this page. The process is the same on Windows, macOS, iPhone, Android, and most smart TVs if they have a browser.

Step-by-step login checks

  1. Connect your phone or computer to the Arris network by Wi-Fi or Ethernet.
  2. Open a browser and enter the correct IP address for your model.
  3. Sign in with the default credentials from the table on this page if you have not changed them.
  4. If the login page does not load, confirm the device is on the same local network and not using mobile data or a VPN.

If you still cannot reach the page, use a local address check tool such as What Is My Local IP and compare it with your router's address. You can also use How to Find Your Router IP Address on Any Device for a device-by-device method.

What to do after you sign in

Once you are inside, start with the basics. Check the internet status page, confirm the Wi-Fi name, and look at connected devices. Then move to security settings if you need to change the Wi-Fi password or admin password.

The settings labels vary by model, but common menu names include Basic, Wireless, LAN, WAN, Firewall, and Status. On many Arris gateways, the wireless section is where you change the SSID and Wi-Fi security mode, while the LAN section controls DHCP and local IP ranges.

When you should change Arris settings and when you should not

You should change Arris settings when you need to secure the network, rename Wi-Fi, reserve an IP for a printer or game console, or fix a conflict on your LAN. You should not change settings randomly if your internet already works, because a wrong WAN or DHCP change can disconnect your devices.

Good reasons to sign in

  • Change the Wi-Fi password after moving into a new place or sharing it with guests.
  • Rename the SSID so you can identify the right network.
  • Check signal or channel settings if nearby networks cause interference.
  • Reserve an IP address for devices like a network printer, NAS, or security camera.
  • Review connected devices if you see unknown clients.

For password changes, our guide on how to change your Wi-Fi password on any router applies to most Arris gateways too. If you need a stronger password, use the Password Generator and verify it with the Password Strength Checker.

Settings you should change carefully

Some changes can break access if you do not know what they do. Replacing DNS servers is usually safe if you know why you are doing it. Changing the LAN IP range, subnet mask, or DHCP pool is more sensitive because those values control how your devices get addresses.

WPA3, the newer Wi-Fi security standard defined by the Wi-Fi Alliance, is better than WPA2 when your Arris model supports it. Not every older Arris gateway supports WPA3, and some only support WPA2. If the option is there, choose the strongest security mode that all your devices can still use.

How to troubleshoot an Arris login that won't open

If the Arris login page will not open, the cause is usually the wrong IP address, a bad cable or Wi-Fi connection, or a device that is not on the same local network. Browser cache and VPN settings can also stop the admin page from loading.

The most common fixes

  • Try both 192.168.0.1 and 192.168.100.1, depending on the model type.
  • Switch from mobile data to Wi-Fi, or connect by Ethernet.
  • Turn off VPN, proxy, or browser privacy extensions for a moment.
  • Use a different browser tab or a private window.
  • Reboot the modem or gateway and wait for the status lights to settle.

If your browser says the site cannot be reached, your computer may have a different default gateway. That usually means another router is upstream, or your device has joined the wrong network. Our What Is My ISP? and What Is My Proxy? tools can help you rule out network interference before you keep trying the login page.

What the lights on the Arris box can tell you

Status lights are a quick way to spot whether the device is connected to the ISP. On cable modems and gateways, power, downstream, upstream, and online indicators usually tell you whether the modem has synced with the cable network. If the online light never becomes steady, the admin page may still open, but the internet side of the modem is not ready.

If you are troubleshooting Wi-Fi rather than WAN access, check the wireless light and whether the SSID is broadcasting. Some Arris devices let you disable Wi-Fi from the admin page, which makes the network look like it disappeared.

Which Arris model uses which login page

Different Arris models use different local management pages, and the model name on the label is the fastest way to pick the right one. This matters because a SURFboard modem and a Wi-Fi gateway do not expose the same settings.

Model comparison table

Model Device type Typical login IP Best use case
SURFboard SB6183 Cable modem 192.168.100.1 Basic modem management and status checks
SURFboard SB8200 Cable modem 192.168.100.1 Faster cable service with modem status access
TG1672G Gateway 192.168.0.1 Home routing and Wi-Fi management
SBG6580 Gateway 192.168.0.1 Older all-in-one internet and Wi-Fi setup
SBG7600 Gateway 192.168.0.1 Modern gateway management and wireless settings
TG3452 Gateway 192.168.0.1 Multi-service home networking and Wi-Fi control

If you want the model-specific login details, use these pages: Arris SURFboard SB6183 login, Arris SURFboard SB8200 login, Arris TG1672G login, Arris SBG6580 login, Arris SBG7600 login, and Arris TG3452 login.

How to tell a modem page from a gateway page

A modem page is often narrower in scope. It may show signal levels, channel information, and connection status without much Wi-Fi control. A gateway page usually includes wireless settings, connected clients, parental controls, and firewall options.

If you are comparing different brands, the router login guides by brand page can help you see how Arris differs from companies like TP-Link, Netgear, and ASUS. Brand differences are common because each vendor uses its own interface and menu layout, even when the networking standards are the same.

How to secure your Arris router after login

You secure an Arris router by changing default credentials, using strong Wi-Fi security, and reviewing who has access to the network. Leaving the factory admin password in place is a bad idea because anyone on the local network can try it if the login page is reachable.

Security steps that matter most

  1. Change the admin password to a unique one you do not use anywhere else.
  2. Set Wi-Fi security to WPA2 or WPA3, depending on what your model supports.
  3. Use a long Wi-Fi password, ideally 16 characters or more.
  4. Review the connected device list for unknown MAC addresses.
  5. Reboot after changes if the interface asks for it.

If you want help making a strong password, use the Password Generator first, then check it with the Password Strength Checker. If you forget the admin password later, your only recovery path may be a factory reset, which is why writing it down in a safe place matters.

What to change on the WAN and LAN side

On the LAN side, DHCP controls which private IP addresses your devices receive. On the WAN side, the modem or gateway may use DHCP or another provisioning method from your ISP to get its public-facing connection. Most users should leave WAN settings alone unless the ISP tells them to change something.

You may also see IPv4 and IPv6 options. IPv4 is still the most common setup for local router admin access, while IPv6 may be enabled by the ISP for newer internet connections. If the interface offers both and your service works, there is usually no need to switch them manually.

What to check if you need more help with Arris or another brand

If you cannot find your model, the login page may be using a different address, or your ISP may have supplied a customized gateway. Some cable providers lock down parts of the interface or use their own setup screens during activation.

Use the general tools and references on this site when you need to identify your network before logging in. The default router passwords list and default passwords database are useful for cross-checking other hardware, and the free network tools page collects the basics in one place.

If you want to compare your local router IP with common defaults, the 192.168.1.1 login, 10.0.0.1 login, and 192.168.1.254 login pages are good reference points. Many ISPs use one of those ranges on different equipment, even when Arris uses 192.168.0.1 or 192.168.100.1 on its own devices.

Arris router login FAQ

What is the default IP address for Arris routers?

Most Arris routers use 192.168.0.1; some models use 192.168.100.1.

What is the default Arris router username and password?

Username: admin, password: password. Arris SURFboard modems use 192.168.100.1; Arris gateways with Wi-Fi use 192.168.0.1.

How do I reset my Arris router?

With the Arris router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.0.1 with admin / password.

How do I change the Wi-Fi password on a Arris router?

Log in at http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.

Can I log in to an Arris router from my phone?

Yes. You can log in from any phone browser as long as the phone is connected to the Arris Wi-Fi or to the same local network by another route. If the page will not load, make sure mobile data is off, because the phone may try to reach the internet instead of the local router address.

Why does my Arris modem show 192.168.100.1 but my gateway shows 192.168.0.1?

Arris uses different local addresses for different product types. Many SURFboard modems use 192.168.100.1 for management, while gateways with built-in Wi-Fi often use 192.168.0.1 because they act as the main router on the home network.

What is the difference between the Arris admin password and my Wi-Fi password?

The admin password protects the router login page. The Wi-Fi password protects access to the wireless network itself. They can be the same on some setups, but they should be different if you want better security and easier recovery later.

Do I need internet access to open the Arris login page?

No. You only need a connection to the local network, either by Wi-Fi or Ethernet. The login page lives on the router or gateway itself, so it should open even if the ISP connection is down.

Will a factory reset change the Arris login IP address?

Usually no. A reset normally restores the default management address, username, and password for that model. It also erases custom Wi-Fi names, wireless passwords, and any saved settings, so use it only when you need to start over.