Digisol Router Login

Default IP, username & password · Updated

Quick answer

To log in to a Digisol router, connect to its network and open http://192.168.2.1 in a browser. The default login is username "admin" and password "1234". Model-specific logins for 2 Digisol routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Digisol router, connect to its network and open http://192.168.2.1 in your browser. The default username is admin and the default password is 1234.

How to log in to your Digisol router

  1. Connect to your Digisol network. Join the Digisol Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.2.1.
  3. Sign in. Enter the username admin and password 1234. If these do not work, check the label on the bottom of your Digisol router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Digisol default passwords by model

ModelIP addressUsernamePassword
DG-BR4000NG192.168.2.1admin1234
DG-HR3400192.168.2.1admin1234

IP addresses used by Digisol

Change the Wi-Fi password on a Digisol router

  1. Log in at http://192.168.2.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Digisol router to factory settings

If you forgot the Digisol admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / 1234 at 192.168.2.1. Read the full guide.

Digisol router login FAQ

What is the default IP address for Digisol routers?

Most Digisol routers use 192.168.2.1.

What is the default Digisol router username and password?

Username: admin, password: 1234. Some models and ISP versions use a unique password printed on the label.

How do I reset my Digisol router?

With the Digisol router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.2.1 with admin / 1234.

How do I change the Wi-Fi password on a Digisol router?

Log in at http://192.168.2.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.