192.168.0.100 Admin Login
Updated
192.168.0.100 is a private IP address used as a router's admin page (default gateway). Many routers and modems use it as their admin login address. To log in, connect to the router's network, open http://192.168.0.100 in a browser and sign in. Sign in with the username and password printed on the router label. If the page won't load, your router uses a different IP.
Connect to your router's network first, then click:
192.168.0.100 is a private IPv4 address that routers, modems and other network devices use as their admin login address (default gateway). Commonly the first DHCP client address on routers using the 192.168.0.x network. Printers and IP cameras often sit here.
How to log in to 192.168.0.100
- Connect to the router network. Connect your phone or computer to the router's Wi-Fi or plug in an Ethernet cable. You must be on the same local network as 192.168.0.100.
- Open http://192.168.0.100. Open a browser and type http://192.168.0.100 into the address bar (not the search box), then press Enter.
- Enter the admin username and password. Enter the router's admin username and password. Common defaults for 192.168.0.100 are admin / admin, or check the label on the router.
- Change your settings. Once you are logged in you can change the Wi-Fi name (SSID), Wi-Fi password, admin password, DNS, port forwarding and parental controls. Click Save/Apply when you are done.
192.168.0.100 default username and password
Most devices at 192.168.0.100 use one of these combinations: admin / admin, admin / password, admin / (blank) or user / user. Check the label on the device for the exact login.
192.168.0.100 not opening? Try this
- Check the IP: run
ipconfig(Windows) or open Wi-Fi details (phone/Mac) and confirm the Default Gateway is 192.168.0.100. How to find your router IP. - Type it correctly: numbers only, in the address bar, not
1921680100,l92.l68.0.l00,192.168.o.1oo. - Use http://: some routers don't accept https.
- Disconnect VPN / proxy: check with our proxy checker.
- Restart the router and try another browser.
- Still stuck? Read 11 fixes for router login problems.
How to change the Wi-Fi password at 192.168.0.100
- Log in at
http://192.168.0.100. - Open Wireless, Wi-Fi or WLAN settings (sometimes under Advanced).
- Choose WPA2-PSK (AES) or WPA3 security and enter a new password of at least 12 characters.
- Click Save / Apply and reconnect your devices. Tip: share the new password with a Wi-Fi QR code.
Forgot the 192.168.0.100 password? Reset the router
If you can't sign in at 192.168.0.100, press and hold the Reset button on the back of the router for 10 to 15 seconds while it's powered on. It restarts with its factory settings, including the address and login printed on its label. Your Wi-Fi name and password are reset too, so reconnect your devices afterwards. Full reset guide.
192.168.0.100 technical details
| IP address | 192.168.0.100 |
|---|---|
| Type | Private (RFC 1918), not reachable from the internet |
| Private range | 192.168.0.0 to 192.168.255.255 (192.168.0.0/16, 16-bit block (Class C private)) |
| Address class | Class C |
| Typical LAN network | 192.168.0.0/24 (subnet mask 255.255.255.0) |
| Usable host range | 192.168.0.1 to 192.168.0.254 |
| Broadcast address | 192.168.0.255 |
| Decimal / Hex | 3232235620 / 0xC0A80064 |
| Binary | 11000000.10101000.00000000.01100100 |
| Reverse DNS zone | 100.0.168.192.in-addr.arpa |
Calculate other ranges with the CIDR subnet calculator.
Common misspellings of 192.168.0.100
People often type these by mistake. They will not open your router: use 192.168.0.100 instead:
192.168.0.100: frequently asked questions
What is 192.168.0.100?
192.168.0.100 is a private IPv4 address in the 192.168.0.0/16 range reserved for local networks. Commonly the first DHCP client address on routers using the 192.168.0.x network. Printers and IP cameras often sit here.
What is the default username and password for 192.168.0.100?
Most routers use admin/admin or admin/password; many newer models print a unique password on the label.
Why is 192.168.0.100 not opening?
Make sure you are connected to the router's network, type http://192.168.0.100 in the address bar, disable VPN/proxy, and confirm your router actually uses 192.168.0.100 by checking the default gateway with ipconfig (Windows) or your Wi-Fi settings.
How do I change my Wi-Fi password at 192.168.0.100?
Log in at http://192.168.0.100, open the Wireless or Wi-Fi section, enter a new password (WPA2/WPA3) and save. All devices will need to reconnect.
I forgot my 192.168.0.100 admin password. What now?
First try the defaults for routers that use 192.168.0.100 and the password on the label. If someone changed it, a factory reset is the only way back in: hold the Reset button for 10 to 15 seconds with the router on, wait for it to restart, then open http://192.168.0.100 again.
Is l92.l68.0.l00 the same as 192.168.0.100?
No. l92.l68.0.l00 is a typo: IP addresses contain only numbers and dots. Type 192.168.0.100 exactly.