192.168.210.252

Private IP address · Device address · Network 192.168.210.0/24

Quick answer

192.168.210.252 is a private (RFC 1918) IP address that only works inside a local network, never on the internet. On a standard home network (192.168.210.0/24, mask 255.255.255.0) it is normally assigned to a device such as a phone, PC or printer, and the router is usually at 192.168.210.1.

192.168.210.252 is a private IPv4 address from the 192.168.0.0/16 block reserved for local networks. On a standard home network (192.168.210.0/24, subnet mask 255.255.255.0) it is a usable host address, often used for static assignments such as servers, NAS drives, cameras or access points.

How to find which device is using 192.168.210.252

  1. Check your router. Log in at 192.168.210.1 (or 192.168.210.254) and open Connected devices, DHCP clients or Attached devices. Find 192.168.210.252 in the list to see the device name and MAC address.
  2. Use the ARP table. On a computer on the same network, run ping 192.168.210.252 followed by arp -a. Look up the MAC address shown with our MAC Address Lookup to identify the manufacturer.
  3. Try the web interface. Printers, cameras, NAS drives and access points often have a page at http://192.168.210.252.

How to set 192.168.210.252 as a static IP

Best option: DHCP reservation: in your router at 192.168.210.1, open DHCP / LAN settings → Address reservation, choose the device (or enter its MAC address) and assign 192.168.210.252. The device always gets the same address and no conflicts occur.

Manual static IP on the device:

IP address192.168.210.252
Subnet mask255.255.255.0 (/24)
Default gateway192.168.210.1
DNS servers192.168.210.1, or 1.1.1.1 / 8.8.8.8

Pick an address outside your router's DHCP pool for manual static IPs to avoid an "IP address conflict" error.

192.168.210.252 not reachable?

  • Make sure your device is on the same 192.168.210.x network: run ipconfig and compare the first three numbers.
  • Run ping 192.168.210.252. "Request timed out" means the device is off, asleep, or blocks ping with its firewall.
  • An "IP address conflict" means two devices use 192.168.210.252: restart both, or create a DHCP reservation.
  • Disconnect from any VPN: it can route local traffic away from your network.

Useful commands for 192.168.210.252

Copy these to test or configure the device at 192.168.210.252 from a computer on the same network:

Windows

ping 192.168.210.252
tracert 192.168.210.252
arp -a | findstr 192.168.210.252
nslookup 192.168.210.252
netsh interface ip set address name="Wi-Fi" static 192.168.210.252 255.255.255.0 192.168.210.1

macOS

ping -c 4 192.168.210.252
traceroute 192.168.210.252
arp -a | grep "(192.168.210.252)"
sudo networksetup -setmanual "Wi-Fi" 192.168.210.252 255.255.255.0 192.168.210.1

Linux

ping -c 4 192.168.210.252
ip neigh show 192.168.210.252
sudo nmcli con mod "<connection>" ipv4.method manual ipv4.addresses 192.168.210.252/24 ipv4.gateway 192.168.210.1

192.168.210.252 technical details

IP address192.168.210.252
Address typePrivate (RFC 1918): 192.168.0.0/16, 16-bit block
Role on a /24 networkDevice address
Position in 192.168.210.0/24252 of 254
Network / broadcast192.168.210.0/24 / 192.168.210.255
Usable host range192.168.210.1 to 192.168.210.254
Integer (decimal)3232289532
HexadecimalC0.A8.D2.FC (0xC0A8D2FC)
Octal0300.0250.0322.0374
Binary11000000.10101000.11010010.11111100
IPv4-mapped IPv6::ffff:192.168.210.252 · ::ffff:c0a8:d2fc
6to4 prefix2002:c0a8:d2fc::/48
Reverse DNS (PTR) name252.210.168.192.in-addr.arpa

192.168.210.252 in every subnet size

The same address belongs to a different network depending on the subnet mask. This table shows where 192.168.210.252 falls for each common prefix length:

PrefixMaskNetworkBroadcast192.168.210.252 is
/16255.255.0.0192.168.0.0192.168.255.255host #54012 of 65534
/20255.255.240.0192.168.208.0192.168.223.255host #764 of 4094
/24255.255.255.0192.168.210.0192.168.210.255host #252 of 254
/25255.255.255.128192.168.210.128192.168.210.255host #124 of 126
/26255.255.255.192192.168.210.192192.168.210.255host #60 of 62
/27255.255.255.224192.168.210.224192.168.210.255host #28 of 30
/28255.255.255.240192.168.210.240192.168.210.255host #12 of 14
/29255.255.255.248192.168.210.248192.168.210.255host #4 of 6
/30255.255.255.252192.168.210.252192.168.210.255network address

Plan other ranges with the subnet calculator.

Common misspellings of 192.168.210.252

These won't open anything: IP addresses contain only digits and dots. Type 192.168.210.252 exactly:

192168210252l92.l68.2l0.252192.168.21o.252192,168,210,252192 168 210 252192.168.210252http //192.168.210.252https://192.168.210.252192.168.210.252/admin

192.168.210.252: FAQ

Is 192.168.210.252 a private IP address?

Yes. 192.168.210.252 is in the 192.168.0.0/16 private range (RFC 1918). It only works inside a local network and cannot be reached directly from the internet.

What device uses 192.168.210.252?

It depends on your network. Log in to your router at 192.168.210.1 and check the DHCP client / connected-devices list, or run "arp -a" on a computer on the same network.

Can I log in to 192.168.210.252?

Only if the device at 192.168.210.252 has a web interface (for example a printer, camera or NAS). Normally you log in to the router at 192.168.210.1 instead.

How do I give a device the IP 192.168.210.252?

In your router at 192.168.210.1, create a DHCP reservation for the device's MAC address with 192.168.210.252, or set a static IP on the device with subnet mask 255.255.255.0 and gateway 192.168.210.1.

What is 192.168.210.252 in binary and hexadecimal?

In binary 192.168.210.252 is 11000000.10101000.11010010.11111100; in hexadecimal it is C0.A8.D2.FC (0xC0A8D2FC); as a single decimal number it is 3232289532.