192.168.252.238

Private IP address · Device address · Network 192.168.252.0/24

Quick answer

192.168.252.238 is a private (RFC 1918) IP address that only works inside a local network, never on the internet. On a standard home network (192.168.252.0/24, mask 255.255.255.0) it is normally assigned to a device such as a phone, PC or printer, and the router is usually at 192.168.252.1.

192.168.252.238 is an internal (private) IP address: it is valid on home and office LANs but never routed on the public internet. On a standard home network (192.168.252.0/24, subnet mask 255.255.255.0) it is a usable host address, often used for static assignments such as servers, NAS drives, cameras or access points. It is usable host number 238 out of 254 on the 192.168.252.0/24 network, 237 addresses above the usual gateway 192.168.252.1.

How to find which device is using 192.168.252.238

  1. Check your router. Log in at 192.168.252.1 (or 192.168.252.254) and open Connected devices, DHCP clients or Attached devices. Find 192.168.252.238 in the list to see the device name and MAC address.
  2. Use the ARP table. On a computer on the same network, run ping 192.168.252.238 followed by arp -a. Look up the MAC address shown with our MAC Address Lookup to identify the manufacturer.
  3. Try the web interface. Printers, cameras, NAS drives and access points often have a page at http://192.168.252.238.

How to set 192.168.252.238 as a static IP

Best option: DHCP reservation: in your router at 192.168.252.1, open DHCP / LAN settings → Address reservation, choose the device (or enter its MAC address) and assign 192.168.252.238. The device always gets the same address and no conflicts occur.

Manual static IP on the device:

IP address192.168.252.238
Subnet mask255.255.255.0 (/24)
Default gateway192.168.252.1
DNS servers192.168.252.1, or 1.1.1.1 / 8.8.8.8

Pick an address outside your router's DHCP pool for manual static IPs to avoid an "IP address conflict" error.

192.168.252.238 not reachable?

  • Make sure your device is on the same 192.168.252.x network: run ipconfig and compare the first three numbers.
  • Run ping 192.168.252.238. "Request timed out" means the device is off, asleep, or blocks ping with its firewall.
  • An "IP address conflict" means two devices use 192.168.252.238: restart both, or create a DHCP reservation.
  • Disconnect from any VPN: it can route local traffic away from your network.

Useful commands for 192.168.252.238

Copy these to test or configure the device at 192.168.252.238 from a computer on the same network:

Windows

ping 192.168.252.238
tracert 192.168.252.238
arp -a | findstr 192.168.252.238
nslookup 192.168.252.238
netsh interface ip set address name="Wi-Fi" static 192.168.252.238 255.255.255.0 192.168.252.1

macOS

ping -c 4 192.168.252.238
traceroute 192.168.252.238
arp -a | grep "(192.168.252.238)"
sudo networksetup -setmanual "Wi-Fi" 192.168.252.238 255.255.255.0 192.168.252.1

Linux

ping -c 4 192.168.252.238
ip neigh show 192.168.252.238
sudo nmcli con mod "<connection>" ipv4.method manual ipv4.addresses 192.168.252.238/24 ipv4.gateway 192.168.252.1

192.168.252.238 technical details

IP address192.168.252.238
Address typePrivate (RFC 1918): 192.168.0.0/16, 16-bit block
Role on a /24 networkDevice address
Position in 192.168.252.0/24238 of 254
Network / broadcast192.168.252.0/24 / 192.168.252.255
Usable host range192.168.252.1 to 192.168.252.254
Integer (decimal)3232300270
HexadecimalC0.A8.FC.EE (0xC0A8FCEE)
Octal0300.0250.0374.0356
Binary11000000.10101000.11111100.11101110
IPv4-mapped IPv6::ffff:192.168.252.238 · ::ffff:c0a8:fcee
6to4 prefix2002:c0a8:fcee::/48
Reverse DNS (PTR) name238.252.168.192.in-addr.arpa

192.168.252.238 in every subnet size

The same address belongs to a different network depending on the subnet mask. This table shows where 192.168.252.238 falls for each common prefix length:

PrefixMaskNetworkBroadcast192.168.252.238 is
/16255.255.0.0192.168.0.0192.168.255.255host #64750 of 65534
/20255.255.240.0192.168.240.0192.168.255.255host #3310 of 4094
/24255.255.255.0192.168.252.0192.168.252.255host #238 of 254
/25255.255.255.128192.168.252.128192.168.252.255host #110 of 126
/26255.255.255.192192.168.252.192192.168.252.255host #46 of 62
/27255.255.255.224192.168.252.224192.168.252.255host #14 of 30
/28255.255.255.240192.168.252.224192.168.252.239host #14 of 14
/29255.255.255.248192.168.252.232192.168.252.239host #6 of 6
/30255.255.255.252192.168.252.236192.168.252.239host #2 of 2

Plan other ranges with the subnet calculator.

Common misspellings of 192.168.252.238

These won't open anything: IP addresses contain only digits and dots. Type 192.168.252.238 exactly:

192168252238l92.l68.252.238192,168,252,238192 168 252 238192.168.252238http //192.168.252.238https://192.168.252.238192.168.252.238/admin

192.168.252.238: FAQ

Is 192.168.252.238 a private IP address?

Yes. 192.168.252.238 is in the 192.168.0.0/16 private range (RFC 1918). It only works inside a local network and cannot be reached directly from the internet.

What device uses 192.168.252.238?

It depends on your network. Log in to your router at 192.168.252.1 and check the DHCP client / connected-devices list, or run "arp -a" on a computer on the same network.

Can I log in to 192.168.252.238?

Only if the device at 192.168.252.238 has a web interface (for example a printer, camera or NAS). Normally you log in to the router at 192.168.252.1 instead.

How do I give a device the IP 192.168.252.238?

In your router at 192.168.252.1, create a DHCP reservation for the device's MAC address with 192.168.252.238, or set a static IP on the device with subnet mask 255.255.255.0 and gateway 192.168.252.1.

What is 192.168.252.238 in binary and hexadecimal?

In binary 192.168.252.238 is 11000000.10101000.11111100.11101110; in hexadecimal it is C0.A8.FC.EE (0xC0A8FCEE); as a single decimal number it is 3232300270.