192.168.75.140

Private IP address · Device address (DHCP pool) · Network 192.168.75.0/24

Quick answer

192.168.75.140 is a private (RFC 1918) IP address that only works inside a local network, never on the internet. On a standard home network (192.168.75.0/24, mask 255.255.255.0) it is normally assigned to a device such as a phone, PC or printer, and the router is usually at 192.168.75.1.

192.168.75.140 is a private IPv4 address from the 192.168.0.0/16 block reserved for local networks. On a standard home network (192.168.75.0/24, subnet mask 255.255.255.0) it is inside the default DHCP pool of many routers (for example 192.168.x.100 to .199), so it is usually assigned automatically to a phone, laptop or smart device. It is usable host number 140 out of 254 on the 192.168.75.0/24 network, 139 addresses above the usual gateway 192.168.75.1.

How to find which device is using 192.168.75.140

  1. Check your router. Log in at 192.168.75.1 (or 192.168.75.254) and open Connected devices, DHCP clients or Attached devices. Find 192.168.75.140 in the list to see the device name and MAC address.
  2. Use the ARP table. On a computer on the same network, run ping 192.168.75.140 followed by arp -a. Look up the MAC address shown with our MAC Address Lookup to identify the manufacturer.
  3. Try the web interface. Printers, cameras, NAS drives and access points often have a page at http://192.168.75.140.

How to set 192.168.75.140 as a static IP

Best option: DHCP reservation: in your router at 192.168.75.1, open DHCP / LAN settings → Address reservation, choose the device (or enter its MAC address) and assign 192.168.75.140. The device always gets the same address and no conflicts occur.

Manual static IP on the device:

IP address192.168.75.140
Subnet mask255.255.255.0 (/24)
Default gateway192.168.75.1
DNS servers192.168.75.1, or 1.1.1.1 / 8.8.8.8

Pick an address outside your router's DHCP pool for manual static IPs to avoid an "IP address conflict" error.

192.168.75.140 not reachable?

  • Make sure your device is on the same 192.168.75.x network: run ipconfig and compare the first three numbers.
  • Run ping 192.168.75.140. "Request timed out" means the device is off, asleep, or blocks ping with its firewall.
  • An "IP address conflict" means two devices use 192.168.75.140: restart both, or create a DHCP reservation.
  • Disconnect from any VPN: it can route local traffic away from your network.

Useful commands for 192.168.75.140

Copy these to test or configure the device at 192.168.75.140 from a computer on the same network:

Windows

ping 192.168.75.140
tracert 192.168.75.140
arp -a | findstr 192.168.75.140
nslookup 192.168.75.140
netsh interface ip set address name="Wi-Fi" static 192.168.75.140 255.255.255.0 192.168.75.1

macOS

ping -c 4 192.168.75.140
traceroute 192.168.75.140
arp -a | grep "(192.168.75.140)"
sudo networksetup -setmanual "Wi-Fi" 192.168.75.140 255.255.255.0 192.168.75.1

Linux

ping -c 4 192.168.75.140
ip neigh show 192.168.75.140
sudo nmcli con mod "<connection>" ipv4.method manual ipv4.addresses 192.168.75.140/24 ipv4.gateway 192.168.75.1

192.168.75.140 technical details

IP address192.168.75.140
Address typePrivate (RFC 1918): 192.168.0.0/16, 16-bit block
Role on a /24 networkDevice address (DHCP pool)
Position in 192.168.75.0/24140 of 254
Network / broadcast192.168.75.0/24 / 192.168.75.255
Usable host range192.168.75.1 to 192.168.75.254
Integer (decimal)3232254860
HexadecimalC0.A8.4B.8C (0xC0A84B8C)
Octal0300.0250.0113.0214
Binary11000000.10101000.01001011.10001100
IPv4-mapped IPv6::ffff:192.168.75.140 · ::ffff:c0a8:4b8c
6to4 prefix2002:c0a8:4b8c::/48
Reverse DNS (PTR) name140.75.168.192.in-addr.arpa

192.168.75.140 in every subnet size

The same address belongs to a different network depending on the subnet mask. This table shows where 192.168.75.140 falls for each common prefix length:

PrefixMaskNetworkBroadcast192.168.75.140 is
/16255.255.0.0192.168.0.0192.168.255.255host #19340 of 65534
/20255.255.240.0192.168.64.0192.168.79.255host #2956 of 4094
/24255.255.255.0192.168.75.0192.168.75.255host #140 of 254
/25255.255.255.128192.168.75.128192.168.75.255host #12 of 126
/26255.255.255.192192.168.75.128192.168.75.191host #12 of 62
/27255.255.255.224192.168.75.128192.168.75.159host #12 of 30
/28255.255.255.240192.168.75.128192.168.75.143host #12 of 14
/29255.255.255.248192.168.75.136192.168.75.143host #4 of 6
/30255.255.255.252192.168.75.140192.168.75.143network address

Plan other ranges with the subnet calculator.

Common misspellings of 192.168.75.140

These won't open anything: IP addresses contain only digits and dots. Type 192.168.75.140 exactly:

19216875140l92.l68.75.l40192.168.75.14o192,168,75,140192 168 75 140192.168.75140http //192.168.75.140https://192.168.75.140192.168.75.140/admin

192.168.75.140: FAQ

Is 192.168.75.140 a private IP address?

Yes. 192.168.75.140 is in the 192.168.0.0/16 private range (RFC 1918). It only works inside a local network and cannot be reached directly from the internet.

What device uses 192.168.75.140?

It depends on your network. Log in to your router at 192.168.75.1 and check the DHCP client / connected-devices list, or run "arp -a" on a computer on the same network.

Can I log in to 192.168.75.140?

Only if the device at 192.168.75.140 has a web interface (for example a printer, camera or NAS). Normally you log in to the router at 192.168.75.1 instead.

How do I give a device the IP 192.168.75.140?

In your router at 192.168.75.1, create a DHCP reservation for the device's MAC address with 192.168.75.140, or set a static IP on the device with subnet mask 255.255.255.0 and gateway 192.168.75.1.

What is 192.168.75.140 in binary and hexadecimal?

In binary 192.168.75.140 is 11000000.10101000.01001011.10001100; in hexadecimal it is C0.A8.4B.8C (0xC0A84B8C); as a single decimal number it is 3232254860.