JioFiber JioFi JMR1040 Login

Default IP address, username & password · Updated

Quick answer

The JioFiber JioFi JMR1040 uses 192.168.225.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.225.1 in a browser and sign in with username "administrator" and password "administrator". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The JioFiber JioFi JMR1040 uses 192.168.225.1 as its default admin address. Open http://192.168.225.1 while connected to the router and sign in with the username administrator and password administrator.

JioFiber routers use 192.168.29.1; JioFi pocket hotspots use 192.168.225.1 (jiofi.local.html).

How to log in to the JioFiber JioFi JMR1040

  1. Connect to the JioFiber JioFi JMR1040. Connect your device to the JioFiber JioFi JMR1040 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.225.1 into your browser's address bar.
  3. Log in. Use username administrator and password administrator.
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the JioFi JMR1040 Wi-Fi name and password

  1. Log in to the JioFiber JioFi JMR1040 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the JioFiber JioFi JMR1040

Hold the reset button for 10 to 15 seconds while the JioFi JMR1040 is on. When the lights flash, release it and wait about two minutes. The login returns to administrator / administrator at 192.168.225.1.

Default network settings

LAN IP (gateway)192.168.225.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.225.1 to 192.168.225.254
BrandJioFiber (India)

JioFiber JioFi JMR1040 FAQ

What is the JioFiber JioFi JMR1040 default IP address?

The JioFiber JioFi JMR1040 uses 192.168.225.1 by default.

What is the JioFiber JioFi JMR1040 default password?

Out of the box, the JioFiber JioFi JMR1040 uses username administrator with password administrator, which differs from the usual JioFiber default (admin / Jiocentrum). If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the JioFiber JioFi JMR1040?

With the JioFi JMR1040 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.225.1 to sign in with the defaults and set it up again.