IPv6 Test
Test your IPv6 connectivity. See your IPv4 and IPv6 addresses and find out whether your ISP and router support IPv6.
| IPv4 address | … |
|---|---|
| IPv6 address | … |
| Preferred protocol | … |
| Address seen by this site | 216.73.216.69 |
The test contacts the public ipify.org API from your browser over IPv4 and IPv6.
What is IPv6?
IPv6 is the successor to IPv4. Its addresses are 128 bits long instead of 32 (for example 2001:db8::1), which gives a practically unlimited supply. With IPv6 every device can get a public address, so connections avoid NAT and carrier-grade NAT.
No IPv6? How to enable it
- Check whether your ISP supports IPv6 (most fibre and cable ISPs now do).
- Log in to your router (see our router login guides) and open IPv6 or WAN → IPv6.
- Set the connection type to Auto/Native, DHCPv6 or SLAAC, as your ISP recommends, and enable IPv6 on the LAN.
- Reboot the router and run this test again.
Plan IPv6 networks with the IPv6 Subnet Calculator.
Frequently asked questions
Do I need IPv6?
Not strictly, since IPv4 still works everywhere. But IPv6 can avoid carrier-grade NAT, improve gaming/NAT type and is required by some newer services.
How do I enable IPv6?
Log in to your router, open the IPv6 or WAN settings and choose the connection type your ISP supports (often "Auto", DHCPv6 or SLAAC). Your ISP must also support IPv6.