Buffalo Router Login

Default IP, username & password · Updated

Quick answer

To log in to a Buffalo router, connect to its network and open http://192.168.11.1 in a browser. The default login is username "admin" and password "password". Model-specific logins for 3 Buffalo routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Buffalo router, connect to its network and open http://192.168.11.1 in your browser. The default username is admin and the default password is password.

Older Buffalo AirStation units use the username root with a blank password.

How to log in to your Buffalo router

  1. Connect to your Buffalo network. Join the Buffalo Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.11.1.
  3. Sign in. Enter the username admin and password password. If these do not work, check the label on the bottom of your Buffalo router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Buffalo default passwords by model

ModelIP addressUsernamePassword
WSR-1166DHP192.168.11.1adminpassword
WXR-5950AX12192.168.11.1adminpassword
WZR-HP-G300NH192.168.11.1root(blank)

More Buffalo default credentials (2)

Additional factory logins for Buffalo equipment (including older, business and ISP models) from the CIRT.net default password database:

UsernamePasswordNotes
adminpassword—
root(blank)—

IP addresses used by Buffalo

Change the Wi-Fi password on a Buffalo router

  1. Log in at http://192.168.11.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Buffalo router to factory settings

If you forgot the Buffalo admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / password at 192.168.11.1. Read the full guide.

The complete Buffalo router guide

What is the Buffalo router login page?

The Buffalo router login page is the local web admin screen you open to change settings on a Buffalo router, access point, or AirStation unit. On most Buffalo models, including the ones listed on this page, you reach it through the private IP address 192.168.11.1, then sign in with the correct username and password for that model.

This page matters because it is where you manage Wi-Fi names, wireless security, DHCP, port forwarding, DNS settings, and firmware updates. Buffalo is a Japan-based networking brand, and its routers use normal home-networking pieces like a router, modem, access point, NAT, DHCP, DNS, TCP/UDP ports, a private IP address, a default gateway, and a subnet mask just like other brands do.

How the login page fits into your network

Your router sits between your home devices and your ISP connection. It usually runs a DHCP server, the service that hands out local IP addresses such as 192.168.11.20 to your phone or laptop. It also uses NAT, or network address translation, to let many private devices share one public internet connection.

If you can open the Buffalo admin page, you can check the router's LAN settings, wireless bands, and connected devices. If you can't, the problem is usually one of four things: you are on the wrong network, you typed the wrong IP, the router uses a different login for that model, or the browser is saving old credentials.

For a wider look at common router login addresses, you can compare Buffalo with other brands in the default router IP address list or the router login guides by brand.

Why do Buffalo routers use 192.168.11.1?

Buffalo uses 192.168.11.1 on many home models because it is a private IP address reserved for local networks. This address is not reachable from the public internet, so it is safe to use as the router's local management address on a home LAN.

The exact LAN address can vary by router brand and by model, but the Buffalo models on this page all use 192.168.11.1. That is why the page's login box and model table match the same address instead of showing a mix of common defaults like 192.168.1.1 or 192.168.0.1.

Buffalo models and login details at a glance

Model Default router IP Login details on this page
WSR-1166DHP 192.168.11.1 Use the credentials shown in the table above on this page
WZR-HP-G300NH 192.168.11.1 root with a blank password
WXR-5950AX12 192.168.11.1 Use the credentials shown in the table above on this page

If you are checking other common router addresses, the 192.168.11.1 login page is a good point of comparison with 192.168.1.1 login, 192.168.0.1 login, 10.0.0.1 login, and 192.168.1.254 login.

How do you log in to a Buffalo router?

You log in to a Buffalo router by connecting to its Wi-Fi or Ethernet network, opening a browser, and entering the router's local IP address in the address bar. On the models listed here, that address is 192.168.11.1, and the correct username and password depend on the exact model.

Step by step

  1. Connect your device to the Buffalo router with Wi-Fi or an Ethernet cable.
  2. Open a browser such as Chrome, Edge, Safari, or Firefox.
  3. Type http://192.168.11.1 in the address bar, not the search box.
  4. Enter the username and password for your exact model from the table on this page.
  5. If the page opens, go to the settings you need, then save any changes before leaving.

If the address does not load, use a local IP check tool like What Is My Local IP or a general helper such as How to Find Your Router IP Address on Any Device. That helps you confirm whether your device is actually on the Buffalo network and whether the router is still using 192.168.11.1.

What the browser should show

A Buffalo login page usually asks for the router username and password before it shows the admin dashboard. Some models may show a simple prompt first, then the full interface after sign-in. If you see a certificate warning, that often means the router is using a self-signed local management page, which is normal on many home routers.

What should you check after you sign in?

After you sign in, check the Wi-Fi settings, LAN settings, and admin password first. Those are the settings that affect everyday use and basic security the most.

The most useful settings to review

Setting What it does Why it matters
SSID The Wi-Fi network name Lets you confirm you are on the right wireless network
Wireless security Usually WPA2 or WPA3 on newer gear Protects your Wi-Fi password and traffic
DHCP range The pool of addresses your router gives out Prevents address conflicts on the network
Default gateway The router address devices use to reach the internet Helps you confirm the LAN path is correct
DNS The service that turns names like example.com into IP addresses Affects how sites resolve and load
Admin password The password for router management Stops neighbors or guests from changing your settings
Firmware The router software version Can fix bugs and security issues

If you want a simple way to compare your current Wi-Fi password with a new one, use a password generator and check it with the password strength checker. For a broader view of known router passwords, the default password database and default router passwords list can help you avoid reusing weak credentials.

When do Buffalo login problems happen?

Buffalo login problems usually happen when the router was reset, the browser saved an old password, or the model uses a different default username. They also happen when you are connected to the wrong network or when the router no longer uses 192.168.11.1 as its management address.

Common Buffalo login problems and fixes

Problem Likely cause What to do
Page won't load You are not on the Buffalo LAN, or the router IP changed Reconnect to the router and try 192.168.11.1 again
Login fails Wrong username or password Check the model-specific credentials on this page
Old password keeps appearing Browser autofill is using stale data Clear saved passwords for the router page or use a private window
Can't reach the admin page after a reset The router may be back on factory defaults Recheck the printed or listed default login for that model
Wi-Fi works but admin page does not You may be on guest Wi-Fi or a different access point Join the main SSID or connect by Ethernet

If you need a refresher on reset behavior, the guide How to Reset a Router to Factory Settings (and When You Should) explains why a reset wipes custom settings and puts the router back into a default state. If you are also changing wireless credentials, the guide How to Change Your Wi-Fi Password on Any Router covers the usual path through the admin menu.

How is Buffalo different from other router brands?

Buffalo routers are similar to other home routers in the way they use private IP addresses, DHCP, NAT, and browser-based management. The main difference is the brand's default address and login pattern, which is why Buffalo often uses 192.168.11.1 instead of the more common 192.168.1.1 or 192.168.0.1.

Comparing Buffalo with common router defaults

  • Buffalo often uses 192.168.11.1 for local management.
  • Netgear commonly uses 192.168.1.1 or routerlogin.net on many models.
  • ASUS often uses 192.168.1.1 and may also support the ASUS Router app on some products.
  • TP-Link often uses 192.168.0.1, 192.168.1.1, or tplinkwifi.net depending on the model.
  • Xfinity gateways often use 10.0.0.1 for local access.

That is why a router address guide can be useful when you move between brands. If you are comparing different setup pages, the internal IP address index is a good place to check the range of common home-network addresses.

Buffalo does not use the same app and login ecosystem as brands such as ASUS, Netgear, or TP-Link unless a specific Buffalo product offers its own management tool. For the models listed here, the browser-based admin page is the main way to manage settings.

How do Wi-Fi, DHCP, DNS, and ports work on a Buffalo router?

Buffalo routers manage local traffic by combining Wi-Fi, DHCP, DNS, NAT, and firewall rules. These parts work together so your devices can join the network, get an IP address, find websites, and move traffic in and out safely.

The main network pieces in plain English

  • SSID is the Wi-Fi name you see when you join the network.
  • MAC address is the hardware ID of a device's network adapter.
  • Private IP address is the local address your router gives to devices inside the home.
  • Subnet mask tells the network which IP addresses belong to the same local subnet.
  • Default gateway is the router address devices use to reach the internet.
  • DHCP is the service that assigns local IP addresses automatically.
  • DNS translates names like buffalo.jp or example.com into IP addresses.
  • NAT lets many private devices use one public internet address.
  • TCP/UDP are the transport protocols used by most internet traffic and many router rules.

Why this matters when you log in

If you change wireless settings, the SSID changes but the router login address usually stays the same. If you change LAN settings, the router's default gateway and DHCP range can change too, and that can affect whether your browser still reaches 192.168.11.1.

If you need to check your own internet connection details while troubleshooting, use What Is My IP? for the public address and What Is My ISP? to identify the provider. For privacy checks, What Is My Proxy? and What Is My User Agent? can also help when a site or login page behaves oddly.

What should you do to keep a Buffalo router secure?

You should change the admin password, use WPA2 or WPA3 for Wi-Fi security, and update the router firmware when Buffalo provides a newer version. Those three steps reduce the chance of someone guessing the login, joining the network without permission, or exploiting known software flaws.

Security checklist for Buffalo routers

  1. Change the router admin password from any factory default or blank value.
  2. Use a strong Wi-Fi password with a long, random passphrase.
  3. Prefer WPA3 if your Buffalo model supports it, or WPA2 if that is the newest secure option available.
  4. Disable remote admin access unless you truly need it.
  5. Review connected devices and remove anything you do not recognise.
  6. Update firmware from the Buffalo admin page when a newer version is available.

If you want to test a new password before saving it, run it through the Password Strength Checker. For a stronger replacement, the Password Generator can create a random password that is harder to guess than a short human-made one.

For a broader security sweep, the guide 12 Ways to Secure Your Wi-Fi Router covers the usual weak spots on home routers, including reused passwords, outdated firmware, and open management access.

Which Buffalo model guide should you use?

You should use the model-specific guide if you know the exact Buffalo model number. That is the best way to avoid confusion when one unit uses a standard admin login and another, like the older WZR-HP-G300NH, uses a different username and blank password pattern.

Model-specific pages on this site

If you are unsure which unit you own, check the sticker on the bottom or back of the router. The model number is usually printed near the serial number and power information. Once you know the model, match it to the table on this page and use the exact login details listed there.

For extra reference, you can also use the default router passwords list and the default password database if you are comparing old hardware across different brands.

Buffalo router login FAQ

What is the default IP address for Buffalo routers?

Most Buffalo routers use 192.168.11.1.

What is the default Buffalo router username and password?

Username: admin, password: password. Older Buffalo AirStation units use the username root with a blank password.

How do I reset my Buffalo router?

With the Buffalo router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.11.1 with admin / password.

How do I change the Wi-Fi password on a Buffalo router?

Log in at http://192.168.11.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.

Can I log in to a Buffalo router from my phone browser?

Yes, if your phone is connected to the Buffalo Wi-Fi network. Open the browser and go to 192.168.11.1, then enter the correct model login. If the page does not open, check that you are not on mobile data or a guest network.

Why does my Buffalo router page show a certificate warning?

That can happen because the router uses a local self-signed certificate for its admin page. The warning does not always mean something is wrong, but you should only continue if you typed the router address yourself and you are connected to your own network.

What if I changed the Buffalo admin password and forgot it?

If you cannot recover the saved password, you usually need to reset the router to factory settings. That restores the default login and clears your custom settings, so you will need to set up Wi-Fi again afterward.

Does every Buffalo router use the same default login?

No. The models listed on this page share the same default IP address, but the username and password can differ by model. Always match the login to the exact model in the table on this page.