Cisco Router Login
Default IP, username & password · Updated
To log in to a Cisco router, connect to its network and open http://192.168.1.1 in a browser. The default login is username "cisco" and password "cisco". Some Cisco models use 192.168.0.1 instead. Model-specific logins for 5 Cisco routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.
- Default IP
- 192.168.1.1
- Username
cisco- Password
cisco
To log in to a Cisco business router, connect to its network and open http://192.168.1.1 in your browser. The default username is cisco and the default password is cisco. Some Cisco models use 192.168.0.1 instead.
Cisco Small Business RV routers force a password change after the first cisco/cisco login.
How to log in to your Cisco router
- Connect to your Cisco network. Join the Cisco Wi-Fi network or connect with an Ethernet cable.
- Open the login page. Open a browser and go to http://192.168.1.1.
- Sign in. Enter the username cisco and password cisco. If these do not work, check the label on the bottom of your Cisco router.
- Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.
Cisco default passwords by model
| Model | IP address | Username | Password |
|---|---|---|---|
| RV042 | 192.168.1.1 | admin | admin |
| RV130W | 192.168.1.1 | cisco | cisco |
| RV160 | 192.168.1.1 | cisco | cisco |
| RV260 | 192.168.1.1 | cisco | cisco |
| RV340 | 192.168.1.1 | cisco | cisco |
More Cisco default credentials (57)
Additional factory logins for Cisco equipment (including older, business and ISP models) from the CIRT.net default password database:
| Username | Password | Notes |
|---|---|---|
EAdmin | (blank) | — |
UAMIS_ | (blank) | — |
UNITY_ | (blank) | — |
UOMNI_ | (blank) | — |
UVPIM_ | (blank) | — |
(blank) | (blank) | — |
(blank) | Cisco | — |
(blank) | Cisco router | — |
(blank) | _Cisco | — |
(blank) | c | — |
(blank) | cc | — |
(blank) | changeit | http://160.78.48.20/vpn/software/How_to_use_Webvpn_with_Citrix_Metaframe.pdf |
(blank) | cisco | — |
(blank) | letmein | — |
(blank) | public/private/secret | — |
(blank) | riverhead | http://www.cisco.com/en/US/products/ps5888/prod_release_note09186a0080237333.html |
(blank) | ILMI | — |
(blank) | cable-docsis | — |
Administrator | admin | — |
Administrator | changeme | — |
CISCO15 | otbu+1 | — |
Cisco | Cisco | — |
ESubscriber | (blank) | — |
End User | 7936 | — |
admin | (blank) | — |
admin | admin | — |
admin | changeme | — |
admin | cisco | — |
admin | default | — |
admin | diamond | — |
admin | tsunami | — |
bbsd-client | NULL | — |
bbsd-client | changeme2 | — |
bubba | (unknown) | — |
cisco | (blank) | — |
cisco | cisco | — |
cmaker | cmaker | — |
enable | (blank) | — |
enable | cisco | — |
guest | (blank) | — |
hsa | hsadb | — |
netrangr | attack | — |
pnadmin | pnadmin | — |
praisenetwork | perfectpraise | — |
private ReadWrite access | secret | — |
public ReadOnly access | secret | — |
ripeop | (blank) | — |
root | attack | — |
root | Cisco | — |
root | blender | — |
root | password | Added by DPL admin. From |
root | secur4u | http://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/network/vsm/6_3/user_guide/cvsm_6_3/overview.html#wp1035089 |
sa | (blank) | — |
technician | 2 + last 4 of Audio | — |
uwmadmin | password | http://www.cisco.com/c/en/us/td/docs/cloud_services/cisco_modeling_labs/v100/installation/guide/administrator/b_cml_install_sys_admin/b_cml_install_sys_admin_chapter_0111.html |
wlse | wlsedb | — |
wlseuser | wlsepassword | — |
IP addresses used by Cisco
Change the Wi-Fi password on a Cisco router
- Log in at
http://192.168.1.1. - Go to the Wireless / Wi-Fi settings.
- Select WPA2 or WPA3 and type a new password.
- Save and reconnect your devices.
Reset a Cisco router to factory settings
If you forgot the Cisco admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with cisco / cisco at 192.168.1.1. Read the full guide.
The complete Cisco router guide
What is the Cisco router login page?
The Cisco router login page is the local web interface you open in a browser to manage a Cisco business router. It is where you sign in to change the Wi-Fi name, set the admin password, check connected devices, and adjust internet and firewall settings.
On Cisco Small Business RV routers, the login process is usually done from a computer or phone that is already connected to the router on Wi-Fi or by Ethernet. If you do not know the router's current IP address, check the brand list in our router login guides by brand or look through the default router IP address list.
What you can do after logging in
Once you are inside the Cisco admin panel, the exact menu names vary by model, but you will usually find options for internet setup, wireless settings, security, firmware updates, and DHCP. DHCP, the service that hands out IP addresses on your network, is one of the most useful settings to check if a device will not connect properly.
Cisco business routers are not the same as consumer Wi-Fi routers from TP-Link, Netgear, or ASUS. They are built for small offices and shared networks, so you will often see more control over NAT, firewall rules, VPN, VLANs, and LAN settings.
Why does Cisco use different default IP addresses and logins?
Cisco uses different default IP addresses and, on some models, different default logins because the company ships several router families with different firmware and management layouts. The usual default router IP is 192.168.1.1, but some Cisco models use 192.168.0.1 instead.
That matters because the browser login will only work if you use the address the router actually listens on. If you guess the wrong one, the page will not load even when the router is working normally. If you want a broader reference, the internal IP address index and the 192.168.1.1 login guide are useful starting points.
Cisco model differences that matter
Cisco Small Business RV routers often share the same general admin style, but the exact default credentials can differ by model. For example, the RV042 uses a different default login than the RV340, RV160, RV260, and RV130W listed on this page. For any model-specific login details, use the table already shown on the page and the model pages linked below.
| Cisco model | Common default IP | Notes |
|---|---|---|
| RV340 | 192.168.1.1 | Small Business RV series |
| RV160 | 192.168.1.1 | Small Business RV series |
| RV260 | 192.168.1.1 | Small Business RV series |
| RV042 | 192.168.1.1 | Uses a different default login than the other models on this page |
| RV130W | 192.168.1.1 | Small Business RV series |
If you are checking credentials across different brands or older hardware, the default password database and the default router passwords list can save time.
How do you reach the Cisco admin panel safely?
You reach the Cisco admin panel by connecting to the router, opening a browser, and entering the router's IP address in the address bar. Use the address bar, not a search engine box, because the router interface is a local web page, not a public website.
Step by step login path
- Connect your device to the Cisco router by Wi-Fi or Ethernet.
- Open a browser such as Chrome, Edge, Firefox, or Safari.
- Enter the router IP address, usually 192.168.1.1 or, on some models, 192.168.0.1.
- Sign in with the model's username and password from the table on this page.
- If the router accepts the login, go to the dashboard, status page, or setup menu.
If the address does not open, use the how to find your router IP address on any device guide. If the page loads but the login does not work, the router may have a custom password, or it may have been reset.
When a Cisco Small Business RV router forces a password change
Cisco Small Business RV routers force a password change after the first successful cisco/cisco login. That is normal behavior. The router wants you to replace the factory default password before you start changing other settings, because leaving the default in place makes the network easy to break into.
After you change the password, write it down somewhere safe or store it in a password manager. If you need help creating a stronger one, try the password generator and the password strength checker.
What settings should you check first after logging in?
After logging in, the first settings to check are the admin password, Wi-Fi name, Wi-Fi password, internet status, and DHCP range. These are the settings that affect both access and everyday connection quality.
Most useful Cisco router settings
| Setting | Why it matters | Common place to find it |
|---|---|---|
| Admin password | Protects the router from unauthorized changes | Administration, Users, or Password settings |
| SSID | This is your Wi-Fi network name | Wireless or Wi-Fi settings |
| Wi-Fi password | Keeps neighbors and guests off your network | Wireless Security or Wireless Settings |
| DHCP range | Controls which local IP addresses the router gives out | LAN, Setup, or DHCP settings |
| Default gateway | The router IP devices use to reach the internet | LAN status or device network details |
| DNS | Controls how names like example.com turn into IP addresses | Internet, WAN, or Advanced settings |
| NAT | Translates private IP addresses to the public internet | Firewall, WAN, or Advanced setup |
| Firmware version | Fixes bugs and security problems | Status or Administration |
Why these settings matter in practice
SSID and Wi-Fi password affect day-to-day access. If your network name is easy to guess or your password is weak, anyone nearby may try to connect. DHCP matters because the router must hand out unique private IP addresses to your laptop, phone, printer, and smart TV. If the DHCP pool is too small, devices can fail to connect even though the Wi-Fi signal is strong.
DNS and NAT matter when websites load slowly or some services refuse to connect. DNS tells the router where to find a site name, while NAT lets many private devices share one public internet connection. If those settings are wrong, your LAN may look fine but internet access can still fail.
How do you troubleshoot a Cisco router login that will not work?
A Cisco router login usually fails for one of four reasons: the wrong IP address, the wrong username or password, a browser issue, or the router using a custom configuration instead of factory defaults. Start with the network connection, because you cannot log in if your device is not on the same local network as the router.
Common login problems and fixes
| Problem | Likely cause | What to try |
|---|---|---|
| Page will not open | Wrong IP address or no local connection | Try 192.168.1.1, then 192.168.0.1, or use a local IP checker |
| Login fails immediately | Wrong credentials or password changed earlier | Check the model table on this page, then try the known factory login if the router is still at defaults |
| Browser shows a warning | HTTPS certificate mismatch or older firmware | Continue only if you are on your own router and the address is local |
| Admin page times out | Router is hung or network connection is unstable | Reboot the router and retry |
| Login works on one device but not another | Cached browser data or a saved old password | Try a private window or clear saved credentials |
If you do not know the router's local address, the What Is My Local IP tool can help you confirm the network you're on. You can also compare the router's LAN address with the 192.168.0.1 login page if your model uses that subnet.
When a reset is the last resort
Resetting the router is only useful when you cannot recover the admin password or the settings are badly misconfigured. A factory reset wipes the current admin password, Wi-Fi name, Wi-Fi password, internet settings, and any custom firewall rules. If you need the step-by-step process, use our how to reset a router to factory settings guide before you press the reset button.
How is Cisco different from home router brands?
Cisco business routers are usually configured more like office equipment than simple home Wi-Fi boxes. Compared with typical consumer routers, they often expose more advanced controls for VLANs, firewall rules, WAN failover, static routes, and VPN setup.
Cisco versus common home router brands
A TP-Link, Netgear, or ASUS home router often focuses on simple setup and app-based management. Cisco Small Business RV routers usually focus on wired reliability, security controls, and more detailed network options. That means the admin pages can feel less flashy, but they are more suitable when you need multiple users, guest access, or a more structured office network.
Cisco also uses business networking terms that you will see in many admin panels: subnet mask, default gateway, MAC address, TCP/UDP ports, and WAN. A MAC address is the hardware identifier for a network adapter. A subnet mask tells devices which IP addresses belong on the local network. TCP and UDP are transport protocols that carry data for different kinds of traffic.
Where this matters for security and performance
If you are setting up office printers, IP cameras, or a NAS, Cisco's LAN and DHCP settings are helpful because you can reserve private IP addresses and keep devices easy to find. If you are trying to secure the network, pay attention to firmware updates, strong admin passwords, Wi-Fi encryption, and any remote management options that are enabled.
For broader hardening steps, see 12 ways to secure your Wi-Fi router. If you want to compare speed changes after a settings update, use the Router Speed Test.
How do you keep a Cisco router secure after login?
You keep a Cisco router secure by changing the default admin password, using strong Wi-Fi encryption, updating firmware, and turning off features you do not need. The default credentials on the page are meant for first access only, not for long-term use.
Security checklist after first login
- Change the admin password right away.
- Change the Wi-Fi password if the wireless network still uses a default or weak one.
- Use WPA3 if the router and your devices support it. If not, WPA2 is still common on many networks.
- Update the firmware from the router's admin interface if Cisco has released a newer version for your model.
- Review remote management, guest network, and port forwarding settings.
- Check which devices are connected and remove anything you do not recognize.
Best habits for ongoing maintenance
Keep a note of your router's LAN IP, admin username, and the current Wi-Fi name in a safe place. If you ever need to troubleshoot a device, knowing the router's default gateway, local IP range, and DHCP pool can cut the time in half.
If you are looking up related network details, these tools may help: What Is My IP?, What Is My ISP?, and What Is My Proxy?. For model-specific Cisco steps, you can also open the dedicated pages for Cisco RV340 login, Cisco RV160 login, Cisco RV260 login, Cisco RV042 login, and Cisco RV130W login.
Cisco router login FAQ
What is the default IP address for Cisco routers?
Most Cisco routers use 192.168.1.1; some models use 192.168.0.1.
What is the default Cisco router username and password?
Username: cisco, password: cisco. Cisco Small Business RV routers force a password change after the first cisco/cisco login.
How do I reset my Cisco router?
With the Cisco router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.1.1 with cisco / cisco.
How do I change the Wi-Fi password on a Cisco router?
Log in at http://192.168.1.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.
Can I log in to a Cisco router from my phone?
Yes, as long as your phone is connected to the same Cisco router by Wi-Fi. Open a mobile browser and enter the router IP address in the address bar, then use the correct model login from the table on this page. If the page will not load, check that mobile data is off so the phone stays on the local network.
Why does my Cisco router ask me to change the password after the first login?
Cisco Small Business RV routers are designed to force a password change after the first default login. This removes the factory password from the device and makes the router harder to access without permission. After you set the new password, keep it somewhere safe because you may need it for future admin access.
What should I do if I changed the Cisco router password and forgot it?
If you cannot recover the password, you will usually need to reset the router to factory settings and set it up again. That erases custom internet, Wi-Fi, and firewall settings, so use it only when recovery is not possible. After the reset, you can log in again with the default details listed on this page for the model you own.
Do Cisco business routers use the same Wi-Fi name and admin password?
No. The Wi-Fi name, also called the SSID, is the wireless network name your devices join. The admin password protects the router settings page, and it should be different from the Wi-Fi password so one stolen password does not expose everything.
Why does one Cisco model use a different default login from another?
Cisco ships several RV models with different firmware and setup defaults, so the login details are not identical across the range. That is why the model table on this page matters more than a generic Cisco username and password. Always match the exact model number before you try to sign in.