Cisco RV340 Login

Default IP address, username & password · Updated

Quick answer

The Cisco RV340 uses 192.168.1.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.1 in a browser and sign in with username "cisco" and password "cisco". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Cisco RV340 uses 192.168.1.1 as its default admin address. Open http://192.168.1.1 while connected to the router and sign in with the username cisco and password cisco.

Cisco Small Business RV routers force a password change after the first cisco/cisco login.

How to log in to the Cisco RV340

  1. Connect to the Cisco RV340. Connect your device to the Cisco RV340 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.1.1 into your browser's address bar.
  3. Log in. Use username cisco and password cisco.
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the RV340 Wi-Fi name and password

  1. Log in to the Cisco RV340 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Cisco RV340

Hold the reset button for 10 to 15 seconds while the RV340 is on. When the lights flash, release it and wait about two minutes. The login returns to cisco / cisco at 192.168.1.1.

Default network settings

LAN IP (gateway)192.168.1.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.1.1 to 192.168.1.254
BrandCisco (USA)

Cisco RV340 setup and troubleshooting guide

How do you log in to a Cisco RV340 from a phone or a PC?

You log in to a Cisco RV340 from either device by opening the router admin page in a browser. Then sign in with the router administrator account. The router uses the same web interface on a phone and a computer, but a larger screen makes menus easier to use.

On a PC, connect to the Cisco RV340 with Wi-Fi or an Ethernet cable, then open a browser and go to http://192.168.1.1. If the router uses a different LAN IP, use that address instead. The default gateway is the local address your device uses to reach the router. The Cisco RV340 uses that address for management.

On a phone, connect to the router first, then open Safari, Chrome, or another browser. Do not use a search engine for the login page. Type the IP address directly into the address bar so you reach the router, not a search result.

If you need help finding the address, use the router IP address guide or check the internal IP address index. If you are not sure which default IP belongs to your model, the default router IP addresses list is a faster place to start.

What the Cisco RV340 login uses

The Cisco RV340 uses an admin username and password. On a fresh unit, the default username is cisco and the default password is cisco. Cisco Small Business RV routers force a password change after the first login.

That forced change matters because it stops you from leaving the router on a public default credential pair. If you skip the change, anyone on your network can try the factory login.

What are the admin menus on a Cisco RV340 for?

The admin menus control the router, not just the Wi-Fi name and password. They are where you manage internet settings, local network settings, security rules, firmware updates, and user access.

Most owners use the Cisco RV340 interface for these jobs:

  • Change the LAN IP address and subnet mask.
  • Check the WAN status and internet connection.
  • Set DHCP, the service that hands out IP addresses on your network.
  • Review NAT, the function that lets many private devices share one public IP address.
  • Create firewall rules and port forwarding rules.
  • Update firmware.
  • Reboot or reset the router.

If you are comparing Cisco business models, the same basic admin flow often appears on other RV routers too. See the Cisco RV160, Cisco RV260, Cisco RV042, and Cisco RV130W pages.

Common menu names you may see

Cisco uses labels that are fairly direct. You may see menus for setup, firewall, VPN, security, and system management. The exact layout can vary by firmware version, so do not rely on screenshots from another model.

How do you change the Wi-Fi name and password on a Cisco RV340?

You change the Wi-Fi name and password in the wireless or wireless settings menu. The Wi-Fi name is the SSID, and the Wi-Fi password controls access to that wireless network.

If the RV340 is acting as your main router and wireless gateway, changing the SSID helps you separate your network from the factory default. A unique SSID also makes it easier to spot the correct network when you have multiple access points or a mesh system nearby.

Safe Wi-Fi settings to use

Setting Good choice Why it helps
SSID A unique name that does not show your address or business name Makes the network easier to identify without revealing personal details
Wi-Fi password A long, random passphrase Reduces the chance of guessable passwords
Security mode WPA3 if available, otherwise WPA2 WPA3 is newer and stronger than WPA2
WPS Off WPS can make wireless access easier to attack

If you want a stronger password, use the password generator and check it with the password strength checker. For a full walkthrough, see the guide on how to change your Wi-Fi password on any router.

What to change after the SSID

After you change the SSID and password, reconnect every phone, laptop, printer, and smart device. Devices keep the old Wi-Fi details until you enter the new ones again.

When should you update the firmware?

You should update the firmware when Cisco releases a fix for security, stability, or management bugs. Firmware is the router's internal software, and it controls how the device routes traffic, applies rules, and stores settings.

A firmware update can matter even when the router seems to work fine. Security fixes often arrive without fanfare, and old firmware can leave known issues unpatched.

How to update firmware safely

  1. Download the correct firmware for the Cisco RV340 model.
  2. Save your current settings first if the interface offers a backup option.
  3. Use the firmware upgrade menu in the admin page.
  4. Wait for the router to finish and restart on its own.
  5. Log in again and check that the version changed.

Do not power off the router during the update. A failed flash can leave the router unusable until you recover it.

What is the difference between reboot and factory reset?

A reboot restarts the Cisco RV340 without erasing your settings. A factory reset erases the configuration and returns the router to its default state, including the default login credentials and network settings.

Use a reboot for temporary glitches. Use a reset only when you cannot recover the password, the configuration is corrupted, or you need to wipe the device before handing it off.

Quick comparison

Action What it does When to use it
Reboot Restarts the router and keeps settings After a freeze, a slow connection, or a minor bug
Factory reset Erases settings and restores defaults Forgotten admin password, broken config, or resale

If you are not sure which one to use, read how to reset a router to factory settings. That guide also explains when a reset is the wrong fix.

What common login problems happen with the Cisco RV340?

The most common login problems are the wrong IP address, the wrong password, a browser cache issue, or a device that is not actually connected to the router. These problems are usually simple. They can still make the router look broken.

Common fixes

  • Confirm that your device is connected to the Cisco RV340 network.
  • Type 192.168.1.1 into the browser address bar, not the search box.
  • Try another browser or a private window.
  • Clear saved passwords if the browser keeps autofilling old credentials.
  • Check whether the router IP changed from the default.
  • Restart the router and the device.

If 192.168.1.1 does not open, use the troubleshooting guide for 192.168.1.1 login fixes or the broader article on fixes to try in order. You can also compare the router IP with 192.168.0.1, 10.0.0.1, and 192.168.1.254 if your network uses a different default gateway.

Why the router IP may change

The Cisco RV340 can use a different local IP if someone changed the LAN settings. When that happens, your device may still get an IP address from DHCP, but the admin page moves to the new gateway address.

What security settings should you change first?

You should change the admin password, disable WPS if it is enabled, use WPA2 or WPA3 for Wi-Fi security, and review remote access settings. These changes reduce the easiest ways an attacker can reach the router.

Security checklist

  • Change the default admin password immediately.
  • Use a unique password that you do not reuse elsewhere.
  • Turn off WPS.
  • Use WPA3 if the firmware and wireless settings support it. Use WPA2 otherwise.
  • Review remote management and disable it unless you need it.
  • Update firmware after setup.
  • Review any port forwarding rules you did not create.

If you are checking the default password after a reset, use the default router passwords list and the default password database. For a broader hardening pass, see 12 ways to secure your Wi-Fi router.

How is the Cisco RV340 different from other Cisco business routers?

The Cisco RV340 is part of Cisco Small Business RV routers, which use a web-based admin interface and a business-focused feature set. That makes it different from many home routers that hide advanced settings or use simplified menus.

If you want the brand overview first, the Cisco router login page links to the rest of the family and helps you match the right model. That matters because RV models do not always share the same default IP, firmware, or menu layout.

When to compare models

Compare models when you are moving settings from an older router, buying a replacement, or helping another office with a similar Cisco unit. Matching the exact model saves time because login steps, default addresses, and reset behavior can differ.

Cisco RV340 FAQ

What is the Cisco RV340 default IP address?

The Cisco RV340 uses 192.168.1.1 by default.

What is the Cisco RV340 default password?

Out of the box, the Cisco RV340 uses username cisco with password cisco. If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Cisco RV340?

With the RV340 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.1 to sign in with the defaults and set it up again.

Can I log in to a Cisco RV340 without a wired connection?

Yes. If your phone or laptop is already connected to the RV340 Wi-Fi, you can open the admin page over wireless. A cable is only useful if the wireless network is down or you want a more stable setup path.

What should I do if the Cisco RV340 asks me to change the password on first login?

Set a new administrator password right away and save it in a password manager. Cisco Small Business RV routers force that change after the default `cisco` login, and that protects the router from leaving factory credentials in place.

Will a reboot delete my Cisco RV340 settings?

No. A reboot only restarts the router. It keeps your Wi-Fi name, password, IP settings, and other configuration in place.

Why does my browser say the Cisco RV340 site is not secure?

Many router login pages use HTTP or a self-signed certificate on the local network. That warning is common for router admin pages and does not always mean the router is unsafe, but you should still make sure you are on the correct local IP address.