Andover Controls Default Password
Power & Building Control · 1 default login · Updated
The most common default login for Andover Controls devices is username "acc" and password "acc". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
acc- Most common password
acc- Known combinations
- 1
Looking for the default login of a Andover Controls UPS, PDU or building-control device? Below are the documented factory credentials. Andover Controls has one documented default login: username acc with password acc.
Andover Controls default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | acc | acc | Same as username | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Andover Controls defaults tell you
- 1 uses the username as the password (for example acc / acc).
Andover Controls default login at a glance
| Brand | Andover Controls |
|---|---|
| Category | Power & Building Control |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 0 of 1 |
| List size rank | 158th of 283 brands |
| Shares a login with | No other brand |
How to log in to a Andover Controls UPS, PDU or building-control device
- Andover Controls admins often use web interface of the network management card
- With Andover Controls hardware, telnet/SSH or serial console
- On Andover Controls equipment, sNMP for monitoring
Which login to try, in order:
- First, try username acc with password acc.
Forgot the password? Reset your Andover Controls UPS, PDU or building-control device
- On the Andover Controls UPS, PDU, use the management card’s reset button or serial console recovery.
- Some cards accept a special login over serial shortly after power-up to reset the password.
Why you should change the Andover Controls default password
- On an unprotected Andover Controls device, attackers can switch off outlets or entire racks.
- Risk for Andover Controls owners: building-control systems can change heating, access or alarms.
- With Andover Controls defaults unchanged, default SNMP communities expose configuration.
How to change it: To secure your Andover Controls UPS, PDU: change the admin and device user passwords, disable Telnet/FTP, change SNMP communities and restrict access by IP. Create a strong replacement with our password generator.
Andover Controls default password FAQ
What is the default password for Andover Controls?
The documented default is username "acc" with password "acc".
What is the default Andover Controls username?
The default username is "acc".
How do I log in to a Andover Controls UPS, PDU or building-control device?
Andover Controls admins often use web interface of the network management card. On the login screen enter username acc with password acc.
The Andover Controls default password doesn't work: what now?
If acc / acc is rejected, someone changed it after installation. On the Andover Controls UPS, PDU, use the management card’s reset button or serial console recovery. Some cards accept a special login over serial shortly after power-up to reset the password.
Is it safe to keep the Andover Controls default password?
No. On an unprotected Andover Controls device, attackers can switch off outlets or entire racks. To secure your Andover Controls UPS, PDU: change the admin and device user passwords, disable Telnet/FTP, change SNMP communities and restrict access by IP.