APC Default Password
Power & Building Control · 10 default logins · Updated
The most common default login for APC devices is username blank (leave it empty) and password "apc". There are 10 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
(blank)- Most common password
apc- Known combinations
- 10
Looking for the default login of a APC UPS, PDU or building-control device? Below are the documented factory credentials. APC has 10 documented default logins. The most common username is (blank) (4 entries) and the most common password is apc (3 entries).
APC default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (any) | TENmanUFactOryPOWER | Product-specific | — |
| 2 | (blank) | serial number of the Call-UPS | Product-specific | — |
| 3 | (blank) | serial number of the Share-UPS | Product-specific | — |
| 4 | (blank) | TENmanUFactOryPOWER | Product-specific | — |
| 5 | (blank) | backdoor | Product-specific | — |
| 6 | POWERCHUTE | APC | Vendor name | — |
| 7 | apc | apc | Same as username | — |
| 8 | device | apc | Vendor name | https://www.jlab.org/Hall-D/Documents/manuals/APC%20stuff/AP9630%209631%20UPS%20Network%20Management%20Card%202%20User's%20Guide%20firmware%20V5.1.1.pdf |
| 9 | device | device | Same as username | — |
| 10 | readonly | apc | Vendor name | https://www.jlab.org/Hall-D/Documents/manuals/APC%20stuff/AP9630%209631%20UPS%20Network%20Management%20Card%202%20User's%20Guide%20firmware%20V5.1.1.pdf |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these APC defaults tell you
- 4 entries have no username: type only the password.
- 2 use the username as the password (for example apc / apc).
- 2 entries include a note on the product, access method or privilege level: check the Notes column.
- APC has the 15th longest default-credential list of the 283 vendors in our database.
APC default login at a glance
| Brand | APC |
|---|---|
| Category | Power & Building Control |
| Known default logins | 10 |
| Unique usernames | 6 |
| Unique passwords | 7 |
| Blank passwords | 0 of 10 |
| List size rank | 15th of 283 brands |
| Shares a login with | No other brand |
How to log in to a APC UPS, PDU or building-control device
- APC admins often use web interface of the network management card
- With APC hardware, telnet/SSH or serial console
- On APC equipment, sNMP for monitoring
Which login to try, in order:
- First, try username (any) with password TENmanUFactOryPOWER.
- If that fails, use username (blank) with password serial number of the Call-UPS.
- Next, try username (blank) with password serial number of the Share-UPS.
- Another option is username (blank) with password TENmanUFactOryPOWER.
- You can also try username (blank) with password backdoor.
- Last, try username POWERCHUTE with password APC.
Forgot the password? Reset your APC UPS, PDU or building-control device
- On the APC UPS, PDU, use the management card’s reset button or serial console recovery.
- Some cards accept a special login over serial shortly after power-up to reset the password.
Why you should change the APC default password
- On an unprotected APC device, attackers can switch off outlets or entire racks.
- Risk for APC owners: building-control systems can change heating, access or alarms.
- With APC defaults unchanged, default SNMP communities expose configuration.
How to change it: Replace (any) / TENmanUFactOryPOWER on every APC device: change the admin and device user passwords, disable Telnet/FTP, change SNMP communities and restrict access by IP. Create a strong replacement with our password generator.
APC default password FAQ
What is the default password for APC?
The most common default is "apc". All 10 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default APC username?
Common default usernames are "(blank)", "device", "(any)", "POWERCHUTE".
How do I log in to a APC UPS, PDU or building-control device?
APC admins often use web interface of the network management card. On the login screen enter username (any) with password TENmanUFactOryPOWER.
The APC default password doesn't work: what now?
If (any) / TENmanUFactOryPOWER is rejected, someone changed it after installation. On the APC UPS, PDU, use the management card’s reset button or serial console recovery. Some cards accept a special login over serial shortly after power-up to reset the password.
Is it safe to keep the APC default password?
No. On an unprotected APC device, attackers can switch off outlets or entire racks. Replace (any) / TENmanUFactOryPOWER on every APC device: change the admin and device user passwords, disable Telnet/FTP, change SNMP communities and restrict access by IP.