Sagem Default Password

Routers & Modems · 4 default logins · Updated

Quick answer

The most common default login for Sagem devices is username "admin" and password "1234". There are 4 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

This page lists the factory default usernames and passwords for Sagem routers, modems and gateways. Sagem has 4 documented default logins. The most common username is admin (2 entries) and the most common password is 1234.

Sagem default username and password list

#UsernamePasswordTypeNotes
1adminepicrouterProduct-specific—
2MenaraMenaraSame as username—
3adminadminSame as username—
4root1234Numeric PIN—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Sagem defaults tell you

  • 2 use the username as the password (for example Menara / Menara).
  • 1 is a numeric PIN, typical for keypads and service menus.
  • Sagem has the 66th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Same as username2
Product-specific1
Numeric PIN1

Sagem default login at a glance

BrandSagem
CategoryRouters & Modems
Known default logins4
Unique usernames3
Unique passwords4
Blank passwords0 of 4
List size rank66th of 283 brands
Shares a login with72 other brands

How to log in to a Sagem router or modem

  • On Sagem equipment, web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device
  • For a Sagem router, telnet or SSH on older or business models
  • Many Sagem models use mobile app on newer consumer models

Which login to try, in order:

  1. First, try username admin with password epicrouter.
  2. If that fails, use username Menara with password Menara.
  3. Next, try username admin with password admin.
  4. Another option is username root with password 1234.

Forgot the password? Reset your Sagem router or modem

  1. Sagem: keep the device powered on.
  2. Press and hold the recessed Reset button for 10–15 seconds with a paperclip.
  3. Release when the lights flash and wait 2–3 minutes for the reboot.
  4. Log in again at the default IP with the default credentials.

Why you should change the Sagem default password

  • If a Sagem router keeps its factory login: anyone on your Wi-Fi can change DNS settings and redirect you to fake websites.
  • On an unprotected Sagem device, botnets such as Mirai scan the internet for routers with default logins.
  • Risk for Sagem owners: attackers can open ports, read connected devices and capture traffic.

How to change it: Replace admin / epicrouter on every Sagem device: open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too. Create a strong replacement with our password generator.

Sagem default password FAQ

What is the default password for Sagem?

The most common default is "1234". All 4 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Sagem username?

Common default usernames are "admin", "Menara", "root".

How do I log in to a Sagem router or modem?

On Sagem equipment, web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device. On the login screen enter username admin with password epicrouter.

The Sagem default password doesn't work: what now?

If admin / epicrouter is rejected, someone changed it after installation. Sagem: keep the device powered on. Press and hold the recessed Reset button for 10–15 seconds with a paperclip.

Is it safe to keep the Sagem default password?

No. If a Sagem router keeps its factory login: anyone on your Wi-Fi can change DNS settings and redirect you to fake websites. Replace admin / epicrouter on every Sagem device: open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too.