Speedcom Default Password
Routers & Modems · 2 default logins · Updated
The most common default login for Speedcom devices is username "admin" and password "epicrouter". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
epicrouter- Known combinations
- 2
Looking for the default login of a Speedcom router or modem? Below are the documented factory credentials. Speedcom has 2 documented default logins. The most common username is admin (2 entries) and the most common password is epicrouter.
Speedcom default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | admin | epicrouter | Product-specific | ART18CX: default IP 10.0.0.2 (source: portforward.com) |
| 2 | admin | conexant | Product-specific | ART514CX: default IP 10.0.0.2 (source: portforward.com) |
"(blank)" means leave the field empty. Source: manufacturer manuals and public router databases (listed in the Notes column). Defaults can differ by model and firmware: check the label on your device.
What these Speedcom defaults tell you
- 2 entries include a note on the product, access method or privilege level: check the Notes column.
- Speedcom has the 135th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Speedcom default login at a glance
| Brand | Speedcom |
|---|---|
| Category | Routers & Modems |
| Known default logins | 2 |
| Unique usernames | 1 |
| Unique passwords | 2 |
| Blank passwords | 0 of 2 |
| List size rank | 135th of 283 brands |
| Shares a login with | 14 other brands |
How to log in to a Speedcom router or modem
- On Speedcom equipment, web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device
- For a Speedcom router, telnet or SSH on older or business models
- Many Speedcom models use mobile app on newer consumer models
Which login to try, in order:
- First, try username admin with password epicrouter (ART18CX: default IP 10.0.0.2 (source: portforward.com)).
- If that fails, use username admin with password conexant (ART514CX: default IP 10.0.0.2 (source: portforward.com)).
Forgot the password? Reset your Speedcom router or modem
- Keep the device powered on.
- Press and hold the recessed Reset button for 10–15 seconds with a paperclip.
- Release when the lights flash and wait 2–3 minutes for the reboot.
- Log in again at the default IP with the default credentials.
Why you should change the Speedcom default password
- With Speedcom defaults unchanged, anyone on your Wi-Fi can change DNS settings and redirect you to fake websites.
- If a Speedcom router keeps its factory login: botnets such as Mirai scan the internet for routers with default logins.
- On an unprotected Speedcom device, attackers can open ports, read connected devices and capture traffic.
How to change it: Speedcom recommends changing the factory login at first setup. Open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too. Create a strong replacement with our password generator.
Speedcom default password FAQ
What is the default password for Speedcom?
The most common default is "epicrouter". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Speedcom username?
The default username is "admin".
How do I log in to a Speedcom router or modem?
On Speedcom equipment, web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device. On the login screen enter username admin with password epicrouter (ART18CX: default IP 10.0.0.2 (source: portforward.com)).
The Speedcom default password doesn't work: what now?
If admin / epicrouter is rejected, someone changed it after installation. Keep the device powered on. Press and hold the recessed Reset button for 10–15 seconds with a paperclip.
Is it safe to keep the Speedcom default password?
No. With Speedcom defaults unchanged, anyone on your Wi-Fi can change DNS settings and redirect you to fake websites. Speedcom recommends changing the factory login at first setup. Open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too.