Zcom Default Password
Wireless Access Points · 1 default login · Updated
The most common default login for Zcom devices is username "root" and password "admin". This is the only default login on record. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
root- Most common password
admin- Known combinations
- 1
Zcom ships many of its wireless access points and bridges with publicly known default credentials, collected below. Zcom has one documented default login: username root with password admin.
Zcom default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | root | admin | Common word | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Zcom defaults tell you
- 8 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Zcom default login at a glance
| Brand | Zcom |
|---|---|
| Category | Wireless Access Points |
| Known default logins | 1 |
| Unique usernames | 1 |
| Unique passwords | 1 |
| Blank passwords | 0 of 1 |
| List size rank | 281st of 283 brands |
| Shares a login with | 8 other brands |
How to log in to a Zcom access point or wireless bridge
- On Zcom equipment, web interface at the AP’s default IP (connect with a cable and set your PC to the same subnet)
- For a Zcom access point, controller or cloud management software
- Many Zcom models use telnet/SSH on enterprise models
Which login to try, in order:
- First, try username root with password admin.
Forgot the password? Reset your Zcom access point or wireless bridge
- On the Zcom access point, power on the access point.
- Hold the Reset button for 10–30 seconds (enterprise models may need longer).
- Connect by cable, set a static IP on your PC in the AP’s default subnet and browse to its default IP.
Why you should change the Zcom default password
- On an unprotected Zcom device, attackers can create rogue networks or disable encryption.
- Risk for Zcom owners: a compromised AP can capture every wireless client’s traffic.
- With Zcom defaults unchanged, many older APs only support WEP/WPA, which is easily cracked.
How to change it: Zcom recommends changing the factory login at first setup. Log in to the web interface, set a new admin password, switch wireless security to WPA2/WPA3 and update the firmware. Create a strong replacement with our password generator.
Zcom default password FAQ
What is the default password for Zcom?
The documented default is username "root" with password "admin".
What is the default Zcom username?
The default username is "root".
How do I log in to a Zcom access point or wireless bridge?
On Zcom equipment, web interface at the AP’s default IP (connect with a cable and set your PC to the same subnet). On the login screen enter username root with password admin.
The Zcom default password doesn't work: what now?
If root / admin is rejected, someone changed it after installation. On the Zcom access point, power on the access point. Hold the Reset button for 10–30 seconds (enterprise models may need longer).
Is it safe to keep the Zcom default password?
No. On an unprotected Zcom device, attackers can create rogue networks or disable encryption. Zcom recommends changing the factory login at first setup. Log in to the web interface, set a new admin password, switch wireless security to WPA2/WPA3 and update the firmware.