Intel Default Password

Switches & Enterprise Networking · 12 default logins · Updated

Quick answer

The most common default login for Intel devices is username blank (leave it empty) and password blank (leave it empty). There are 12 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a Intel switch or network device that is still on its factory settings. Intel has 12 documented default logins. The most common username is (blank) (4 entries) and the most common password is (blank) (4 entries).

Intel default username and password list

#UsernamePasswordTypeNotes
1(blank)IntelVendor name—
2(blank)isolationProduct-specific—
3(blank)shivaProduct-specific—
4Guest(blank)Blank password—
5NICONEXNICONEXSame as username—
6intelintelSame as username—
7root(blank)Blank password—
8setupsetupSame as username—
9(blank)(blank)Blank password—
10admin(blank)Blank password—
11khankahnProduct-specific—
12rootadminCommon word—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Intel defaults tell you

  • 4 of 12 entries use a blank password: leave the password field empty.
  • 4 entries have no username: type only the password.
  • 3 use the username as the password (for example NICONEX / NICONEX).
  • Intel has the 13th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Blank password4
Product-specific3
Same as username3
Vendor name1

Intel default login at a glance

BrandIntel
CategorySwitches & Enterprise Networking
Known default logins12
Unique usernames8
Unique passwords9
Blank passwords4 of 12
List size rank13th of 283 brands
Shares a login with84 other brands

How to log in to a Intel switch or network device

  • On Intel equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • For a Intel switch, sSH or Telnet to the management IP
  • Many Intel models use web management interface (HTTP/HTTPS) on managed models
  • Intel admins often use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username (blank) with password Intel.
  2. If that fails, use username (blank) with password isolation.
  3. Next, try username (blank) with password shiva.
  4. Another option is username Guest with password (blank).
  5. You can also try username NICONEX with password NICONEX.
  6. Last, try username intel with password intel.

Forgot the password? Reset your Intel switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Intel default password

  • On an unprotected Intel device, full control of VLANs, routing and traffic mirroring.
  • Risk for Intel owners: default SNMP community strings ("public"/"private") leak or change configuration.
  • With Intel defaults unchanged, telnet sends credentials in clear text: use SSH.

How to change it: Intel recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Intel default password FAQ

What is the default password for Intel?

The most common default is "(blank)". All 12 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Intel username?

Common default usernames are "(blank)", "root", "Guest", "NICONEX".

How do I log in to a Intel switch or network device?

On Intel equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username (blank) with password Intel.

The Intel default password doesn't work: what now?

If (blank) / Intel is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Intel default password?

No. On an unprotected Intel device, full control of VLANs, routing and traffic mirroring. Intel recommends changing the factory login at first setup. From the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.