DrayTek Router Login

Default IP, username & password · Updated

Quick answer

To log in to a DrayTek router, connect to its network and open http://192.168.1.1 in a browser. The default login is username "admin" and password "admin". Model-specific logins for 4 DrayTek routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a DrayTek business router, connect to its network and open http://192.168.1.1 in your browser. The default username is admin and the default password is admin.

How to log in to your DrayTek router

  1. Connect to your DrayTek network. Join the DrayTek Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.1.1.
  3. Sign in. Enter the username admin and password admin. If these do not work, check the label on the bottom of your DrayTek router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

DrayTek default passwords by model

ModelIP addressUsernamePassword
Vigor 2765192.168.1.1adminadmin
Vigor 2860192.168.1.1adminadmin
Vigor 2862192.168.1.1adminadmin
Vigor 2927192.168.1.1adminadmin

More DrayTek default credentials (4)

Additional factory logins for DrayTek equipment (including older, business and ISP models) from the CIRT.net default password database:

UsernamePasswordNotes
admin(blank)—
Draytek1234—
adminadmin—
draytek1234—

IP addresses used by DrayTek

Change the Wi-Fi password on a DrayTek router

  1. Log in at http://192.168.1.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a DrayTek router to factory settings

If you forgot the DrayTek admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / admin at 192.168.1.1. Read the full guide.

The complete DrayTek router guide

What is a DrayTek router login?

A DrayTek router login is the admin sign-in screen you use to manage a DrayTek router, usually through its local IP address on your home or office network. For most DrayTek models, including the Vigor models listed on this page, that local address is 192.168.1.1 and the login uses the router's own web interface, not a cloud account.

DrayTek is a Taiwan-based networking brand best known for business routers, VDSL and DSL gateways, firewalls, VPN features, and multi-WAN models. That means the login page is where you configure the things that affect your whole network: Wi-Fi settings, DHCP, DNS, NAT, firewall rules, port forwarding, VPN, and internet WAN setup.

If you want a broader look at common router admin addresses, the default router IP address list is useful. If you are not sure whether a login problem is about the IP address, the username, or the password, the default router passwords list and default password database can help you compare the details.

Why do you need to log in to a DrayTek router?

You log in to a DrayTek router when you need to change network settings that normal devices cannot control. The router is the device that connects your local network to the modem or internet line, runs NAT, and usually acts as the DHCP server that hands out private IP addresses to phones, laptops, printers, and smart TVs.

The admin interface is also where you check status information that can save time during troubleshooting. You can see the WAN connection state, the default gateway used by devices on your network, the DNS servers in use, and often the MAC address of the router or connected clients.

Common tasks done from the DrayTek admin page

Task Why it matters
Change the Wi-Fi name, or SSID Makes the network easier to recognise and can help separate guest and main networks
Change the Wi-Fi password Stops neighbours or old guests from reconnecting
Review DHCP settings Controls which private IP addresses the router gives out
Set port forwarding Lets specific services on your network accept inbound traffic over TCP or UDP
Check WAN or internet status Confirms whether the router has a live connection to the modem or ISP
Update firmware Fixes bugs and security issues in the router software
Review firewall or VPN settings Helps protect the network and set up remote access

If you are comparing login pages across brands, the router login guides by brand page is a good starting point. For nearby examples of common local addresses, you can also compare 192.168.1.1 login and 192.168.1.254 login.

How do you log in to a DrayTek router?

You log in to a DrayTek router by connecting to the router's network, opening a browser, and entering the router IP address in the address bar. The standard address for the DrayTek models on this page is 192.168.1.1, then you sign in with the admin username and password shown in the model table on this page.

Step-by-step login process

  1. Connect your phone, laptop, or desktop to the DrayTek router by Wi-Fi or Ethernet.
  2. Open a web browser such as Chrome, Edge, Safari, or Firefox.
  3. Type http://192.168.1.1 into the address bar, not the search box.
  4. Enter the router username and password from the table on this page.
  5. After you sign in, use the menu to change the setting you need.

If the page does not load, the problem is usually one of three things: you are not connected to the DrayTek network, the router IP address has been changed, or your device is using a different gateway. The How to Find Your Router IP Address on Any Device guide explains how to find the correct address on Windows, macOS, iPhone, Android, and other devices.

What the main network terms mean

A DrayTek admin page can show a lot of terms that are easy to mix up. These are the ones that matter most.

  • SSID. The Wi-Fi network name you see in the list of nearby networks.
  • Private IP address. An address used inside your home or office network, such as 192.168.1.1 or an address given to a laptop.
  • Default gateway. The router address that devices send traffic to when they want to reach the internet.
  • Subnet mask. The network rule that tells devices which addresses are local and which are outside the local network.
  • MAC address. A hardware identifier assigned to a network interface, often used for filtering or device lists.
  • DHCP. The service that hands out IP addresses automatically.
  • DNS. The service that turns names like example.com into IP addresses.
  • NAT. Network Address Translation, the process that lets many devices share one public internet connection.
  • TCP/UDP. The two main transport protocols used by internet traffic and port forwarding rules.

If you want to see how local addresses are used across different networks, the internal IP address index is a useful reference. For device-side checks, the What Is My Local IP tool can help you confirm whether your computer is on the right subnet.

When should you change DrayTek settings?

You should change DrayTek settings when you are fixing a problem, improving security, or setting up a new device or service. The best time is usually right after installation, after an ISP change, after a password reset, or when Wi-Fi performance drops for no clear reason.

A DrayTek router is especially worth revisiting when you add a mesh system, another access point, a VoIP line, a VPN, or a work device that needs a fixed internal address. If the router is handing out addresses through DHCP, you may need to reserve one for a printer, NAS, or camera so it keeps the same private IP address.

Settings that are worth checking first

Setting Where it affects the network
WAN connection Internet access from the router to the modem or ISP
LAN IP address The router's local address, often the default gateway
DHCP range Which IP addresses are automatically assigned to devices
Wi-Fi SSID and password The wireless network name and access code
DNS servers How domain names are resolved
Firewall rules What traffic is allowed or blocked
Port forwarding Whether outside traffic can reach a specific device inside your network

If you are adjusting wireless settings, the general process is similar on most brands, but the exact menu names vary. The article How to Change Your Wi-Fi Password on Any Router is useful if you want the process in a brand-neutral way.

How do you troubleshoot a DrayTek router login that fails?

A failed login usually means one of four things: the browser is using the wrong address, the device is not connected to the DrayTek network, the login credentials are wrong, or the router has already been reconfigured. Start with the connection and IP address, because that fixes the most common cases without changing anything on the router.

Troubleshooting steps that actually help

  1. Make sure you are connected to the DrayTek router, not mobile data or a different Wi-Fi network.
  2. Try http://192.168.1.1 again in the browser address bar.
  3. Turn off VPN, proxy, or any browser extension that may interfere with local network access.
  4. Restart the browser, then try a private or incognito window.
  5. Check whether another device can open the login page.
  6. If the router was already changed, find the active gateway on your device and use that IP instead.

If the page loads but the credentials do not work, check the model table on this page again and confirm you are using the correct username and password pair for that exact model. If the router was reset recently, some settings may have returned to defaults, but any saved custom password would no longer be in use.

What a reset does and does not do

A factory reset restores the router to its original settings. That usually returns the LAN IP address, admin username, admin password, Wi-Fi name, and Wi-Fi password to default values, but it also removes custom WAN settings, port forwards, static routes, and any special firewall or VPN setup.

If you are not sure whether to reset, read How to Reset a Router to Factory Settings (and When You Should) first. A reset is useful when you are locked out, but it is not the first step if the browser simply has the wrong address or your device is on the wrong network.

How do DrayTek models compare with each other?

The DrayTek models on this page use the same login address pattern, but they are not identical routers. They are part of the Vigor business router line, and the web interface, hardware features, and WAN options can vary by model, firmware, and region.

Model comparison table

Model Default IP Login note
Vigor 2860 192.168.1.1 Use the model entry on this page for the current login details
Vigor 2862 192.168.1.1 Use the model entry on this page for the current login details
Vigor 2927 192.168.1.1 Use the model entry on this page for the current login details
Vigor 2765 192.168.1.1 Use the model entry on this page for the current login details

The main thing that matters for login is the local IP address and the saved admin credentials. For model-specific guidance, use the dedicated pages for DrayTek Vigor 2860 login, DrayTek Vigor 2862 login, DrayTek Vigor 2927 login, and DrayTek Vigor 2765 login.

DrayTek is often compared with brands like ASUS, Netgear, and TP-Link, but the business-router approach is different from a simple home router. DrayTek models usually put more focus on WAN control, routing, firewall rules, and VPN options. If you are working on a dual-WAN or office network, that extra control is often the reason people choose DrayTek in the first place.

How do you secure a DrayTek router after login?

You secure a DrayTek router by changing the default admin password, using a strong Wi-Fi password, and checking which management features are open to the local network. Default credentials are widely known, so leaving them unchanged makes it much easier for someone on the same network to get into the router.

Security settings to review right away

  • Change the admin password to something long and unique.
  • Change the Wi-Fi password if it still uses a default value.
  • Review whether remote management is enabled.
  • Check that WPA3 is enabled if the router and client devices support it. WPA3 is the newer Wi-Fi security standard that improves protection over WPA2.
  • Make sure firmware is current enough for your model.
  • Review any port forwarding rules you do not need.
  • Check guest network settings if your DrayTek model uses one.

If you need a strong password, the Password Generator can create one quickly, and the Password Strength Checker can tell you if your chosen password is too weak. For a wider checklist, see 12 Ways to Secure Your Wi-Fi Router.

What to do if you share the network with guests or staff

If other people use the same network, make admin access harder to reach. Keep the router admin password separate from the Wi-Fi password, avoid obvious names for the SSID, and only give router access to people who need it. On a business network, that separation matters because a Wi-Fi password alone should not give someone control of the router itself.

Which tools help you verify a DrayTek router setup?

A few simple tools make DrayTek troubleshooting much faster. They help you confirm whether the router is online, whether your device is on the right local network, and whether the public internet address matches what you expect.

Helpful tools to use alongside the login page

Tool What it checks
Router Speed Test Download and upload performance from your connection
What Is My IP? Your public IP address on the internet
What Is My Local IP The private IP address your device has on the local network
What Is My ISP? Which provider your connection appears to use
What Is My Proxy? Whether a proxy is affecting your traffic
What Is My User Agent? The browser identity string your device sends

If you are comparing several routers or recovering an address you forgot, the free network tools page gives you a broader set of checks. For a quick sanity check, the local IP tool and the public IP tool together tell you whether your device is talking to the right network and whether the internet side is changing as expected.

What are the most common mistakes when using DrayTek login pages?

The most common mistakes are simple: typing the IP address into a search engine, using the wrong network, confusing the router password with the Wi-Fi password, or assuming every DrayTek model uses the same saved configuration. These mistakes are easy to make because the login page looks like any other website, but it is only reachable from the local network.

Another common issue is using a bookmarked page from a previous network setup. If the router IP address has changed, the bookmark may still open in the browser but it will no longer reach the current device. In that case, use the router IP address from the table on this page or check your gateway directly.

If you want a quick reference for all common default router addresses, the default router IP address list and 192.168.1.1 login page are good cross-checks. That is especially useful when you are helping someone else and the router brand is uncertain.

A short checklist before you try again

  • Confirm you are on the DrayTek Wi-Fi or Ethernet connection.
  • Use the browser address bar, not search.
  • Check the exact IP address for your model.
  • Use the credentials shown in the model table on this page.
  • If needed, test the network with What Is My Local IP.

DrayTek router login FAQ

What is the default IP address for DrayTek routers?

Most DrayTek routers use 192.168.1.1.

What is the default DrayTek router username and password?

Username: admin, password: admin. Some models and ISP versions use a unique password printed on the label.

How do I reset my DrayTek router?

With the DrayTek router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.1.1 with admin / admin.

How do I change the Wi-Fi password on a DrayTek router?

Log in at http://192.168.1.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.

Can I log in to a DrayTek router from a phone?

Yes, as long as your phone is connected to the DrayTek network. Open a mobile browser and enter the router's local IP address, which is usually 192.168.1.1 on the models listed on this page. If mobile data is on and Wi-Fi is off, the login page usually will not load.

Why does the DrayTek login page say the connection is not private?

That message can appear if the router uses an older or self-signed certificate, or if the browser is trying to force HTTPS on a local admin page. For a local router login, the address is often opened over plain HTTP instead of a public website certificate. Make sure you are on the correct local IP before you continue.

What should I do if 192.168.1.1 does not open the DrayTek login page?

First check that you are connected to the router's network. Then confirm the router is actually using 192.168.1.1 as its LAN address, because some networks use a different default gateway after setup changes. If needed, check the router IP from your device's network settings or use the router IP lookup guides on this site.

Does a DrayTek router use the same password for Wi-Fi and admin login?

Not necessarily. The Wi-Fi password controls wireless access, while the admin password controls access to the router settings page. They can be the same on some setups, but they should be kept separate for better security.

Can I use DrayTek login details from one model on another model?

No, you should not assume that. The models on this page may share the same default IP address, but the correct login details should always come from the model entry on this page. Using the wrong credentials is one of the fastest ways to lock yourself out or waste time troubleshooting the wrong thing.