192.168.2.130

Private IP address · Device address (DHCP pool) · Network 192.168.2.0/24

Quick answer

192.168.2.130 is a private (RFC 1918) IP address that only works inside a local network, never on the internet. On a standard home network (192.168.2.0/24, mask 255.255.255.0) it is normally assigned to a device such as a phone, PC or printer, and the router is usually at 192.168.2.1.

192.168.2.130 is an internal (private) IP address: it is valid on home and office LANs but never routed on the public internet. On a standard home network (192.168.2.0/24, subnet mask 255.255.255.0) it is inside the default DHCP pool of many routers (for example 192.168.x.100 to .199), so it is usually assigned automatically to a phone, laptop or smart device. It is usable host number 130 out of 254 on the 192.168.2.0/24 network, 129 addresses above the usual gateway 192.168.2.1.

The 192.168.2.x network is the default LAN of Belkin, Edimax, Digisol routers, so on those networks 192.168.2.130 is normally a connected device.

About the 192.168.2.x network

192.168.2.0/24 is a common choice for a second router placed behind a main router. You will typically find it on:

  • Belkin routers
  • Edimax routers
  • Digisol routers

How to find which device is using 192.168.2.130

  1. Check your router. Log in at 192.168.2.1 (or 192.168.2.254) and open Connected devices, DHCP clients or Attached devices. Find 192.168.2.130 in the list to see the device name and MAC address.
  2. Use the ARP table. On a computer on the same network, run ping 192.168.2.130 followed by arp -a. Look up the MAC address shown with our MAC Address Lookup to identify the manufacturer.
  3. Try the web interface. Printers, cameras, NAS drives and access points often have a page at http://192.168.2.130.

How to set 192.168.2.130 as a static IP

Best option: DHCP reservation: in your router at 192.168.2.1, open DHCP / LAN settings → Address reservation, choose the device (or enter its MAC address) and assign 192.168.2.130. The device always gets the same address and no conflicts occur.

Manual static IP on the device:

IP address192.168.2.130
Subnet mask255.255.255.0 (/24)
Default gateway192.168.2.1
DNS servers192.168.2.1, or 1.1.1.1 / 8.8.8.8

Pick an address outside your router's DHCP pool for manual static IPs to avoid an "IP address conflict" error.

192.168.2.130 not reachable?

  • Make sure your device is on the same 192.168.2.x network: run ipconfig and compare the first three numbers.
  • Run ping 192.168.2.130. "Request timed out" means the device is off, asleep, or blocks ping with its firewall.
  • An "IP address conflict" means two devices use 192.168.2.130: restart both, or create a DHCP reservation.
  • Disconnect from any VPN: it can route local traffic away from your network.

Useful commands for 192.168.2.130

Copy these to test or configure the device at 192.168.2.130 from a computer on the same network:

Windows

ping 192.168.2.130
tracert 192.168.2.130
arp -a | findstr 192.168.2.130
nslookup 192.168.2.130
netsh interface ip set address name="Wi-Fi" static 192.168.2.130 255.255.255.0 192.168.2.1

macOS

ping -c 4 192.168.2.130
traceroute 192.168.2.130
arp -a | grep "(192.168.2.130)"
sudo networksetup -setmanual "Wi-Fi" 192.168.2.130 255.255.255.0 192.168.2.1

Linux

ping -c 4 192.168.2.130
ip neigh show 192.168.2.130
sudo nmcli con mod "<connection>" ipv4.method manual ipv4.addresses 192.168.2.130/24 ipv4.gateway 192.168.2.1

192.168.2.130 technical details

IP address192.168.2.130
Address typePrivate (RFC 1918): 192.168.0.0/16, 16-bit block
Role on a /24 networkDevice address (DHCP pool)
Position in 192.168.2.0/24130 of 254
Network / broadcast192.168.2.0/24 / 192.168.2.255
Usable host range192.168.2.1 to 192.168.2.254
Integer (decimal)3232236162
HexadecimalC0.A8.02.82 (0xC0A80282)
Octal0300.0250.02.0202
Binary11000000.10101000.00000010.10000010
IPv4-mapped IPv6::ffff:192.168.2.130 · ::ffff:c0a8:282
6to4 prefix2002:c0a8:0282::/48
Reverse DNS (PTR) name130.2.168.192.in-addr.arpa

192.168.2.130 in every subnet size

The same address belongs to a different network depending on the subnet mask. This table shows where 192.168.2.130 falls for each common prefix length:

PrefixMaskNetworkBroadcast192.168.2.130 is
/16255.255.0.0192.168.0.0192.168.255.255host #642 of 65534
/20255.255.240.0192.168.0.0192.168.15.255host #642 of 4094
/24255.255.255.0192.168.2.0192.168.2.255host #130 of 254
/25255.255.255.128192.168.2.128192.168.2.255host #2 of 126
/26255.255.255.192192.168.2.128192.168.2.191host #2 of 62
/27255.255.255.224192.168.2.128192.168.2.159host #2 of 30
/28255.255.255.240192.168.2.128192.168.2.143host #2 of 14
/29255.255.255.248192.168.2.128192.168.2.135host #2 of 6
/30255.255.255.252192.168.2.128192.168.2.131host #2 of 2

Plan other ranges with the subnet calculator.

Common misspellings of 192.168.2.130

These won't open anything: IP addresses contain only digits and dots. Type 192.168.2.130 exactly:

1921682130l92.l68.2.l30192.168.2.13o192,168,2,130192 168 2 130192.168.2130http //192.168.2.130https://192.168.2.130192.168.2.130/admin

192.168.2.130: FAQ

Is 192.168.2.130 a private IP address?

Yes. 192.168.2.130 is in the 192.168.0.0/16 private range (RFC 1918). It only works inside a local network and cannot be reached directly from the internet.

What device uses 192.168.2.130?

It depends on your network. Log in to your router at 192.168.2.1 and check the DHCP client / connected-devices list, or run "arp -a" on a computer on the same network.

Can I log in to 192.168.2.130?

Only if the device at 192.168.2.130 has a web interface (for example a printer, camera or NAS). Normally you log in to the router at 192.168.2.1 instead.

How do I give a device the IP 192.168.2.130?

In your router at 192.168.2.1, create a DHCP reservation for the device's MAC address with 192.168.2.130, or set a static IP on the device with subnet mask 255.255.255.0 and gateway 192.168.2.1.

Who uses the 192.168.2.x network?

192.168.2.0/24 is a common choice for a second router placed behind a main router. It is used by Belkin routers, Edimax routers, Digisol routers.

What is 192.168.2.130 in binary and hexadecimal?

In binary 192.168.2.130 is 11000000.10101000.00000010.10000010; in hexadecimal it is C0.A8.02.82 (0xC0A80282); as a single decimal number it is 3232236162.