Linksys E5400 Login

Default IP address, username & password · Updated

Quick answer

The Linksys E5400 uses 192.168.1.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.1 in a browser and sign in with username blank (leave it empty) and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Linksys E5400 uses 192.168.1.1 as its default admin address. Open http://192.168.1.1 (or http://myrouter.local) while connected to the router and sign in with the username (blank) and password admin.

On many classic Linksys routers the username field can be left blank and the password is admin.

How to log in to the Linksys E5400

  1. Connect to the Linksys E5400. Connect your device to the Linksys E5400 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.1.1 (or http://myrouter.local) into your browser's address bar.
  3. Log in. Use username (blank) and password admin.
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the E5400 Wi-Fi name and password

  1. Log in to the Linksys E5400 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Linksys E5400

Hold the reset button for 10 to 15 seconds while the E5400 is on. When the lights flash, release it and wait about two minutes. The login returns to (blank) / admin at 192.168.1.1.

Default network settings

LAN IP (gateway)192.168.1.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.1.1 to 192.168.1.254
BrandLinksys (USA)

Linksys E5400 FAQ

What is the Linksys E5400 default IP address?

The Linksys E5400 uses 192.168.1.1 by default. You can also open myrouter.local.

What is the Linksys E5400 default password?

Out of the box, the Linksys E5400 uses username (blank) with password admin, which differs from the usual Linksys default (admin / admin). If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Linksys E5400?

With the E5400 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.1 to sign in with the defaults and set it up again.