Linksys EA7500 Login
Default IP address, username & password · Updated
The Linksys EA7500 uses 192.168.1.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.1 in a browser and sign in with username "admin" and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.1.1
- Username
admin- Password
admin
The Linksys EA7500 uses 192.168.1.1 as its default admin address. Open http://192.168.1.1 (or http://myrouter.local) while connected to the router and sign in with the username admin and password admin.
On many classic Linksys routers the username field can be left blank and the password is admin.
How to log in to the Linksys EA7500
- Connect to the Linksys EA7500. Connect your device to the Linksys EA7500 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.1.1 (or http://myrouter.local) into your browser's address bar.
- Log in. Use username admin and password admin.
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the EA7500 Wi-Fi name and password
- Log in to the Linksys EA7500 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the Linksys EA7500
Hold the reset button for 10 to 15 seconds while the EA7500 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / admin at 192.168.1.1.
Default network settings
| LAN IP (gateway) | 192.168.1.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.1.1 to 192.168.1.254 |
| Brand | Linksys (USA) |
Linksys EA7500 FAQ
What is the Linksys EA7500 default IP address?
The Linksys EA7500 uses 192.168.1.1 by default. You can also open myrouter.local.
What is the Linksys EA7500 default password?
Out of the box, the Linksys EA7500 uses username admin with password admin. If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the Linksys EA7500?
With the EA7500 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.1 to sign in with the defaults and set it up again.