Ubiquiti UniFi Express Login

Default IP address, username & password · Updated

Quick answer

The Ubiquiti UniFi Express uses 192.168.1.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.1 in a browser and sign in with username blank (leave it empty) and password created during first setup. If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Ubiquiti UniFi Express uses 192.168.1.1 as its default admin address. Open http://192.168.1.1 while connected to the router and sign in with the username (blank) and password (created during first setup).

EdgeRouter and older UniFi gear use ubnt/ubnt; UniFi OS consoles are set up through the UniFi app or setup.ui.com.

How to log in to the Ubiquiti UniFi Express

  1. Connect to the Ubiquiti UniFi Express. Connect your device to the Ubiquiti UniFi Express by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.1.1 into your browser's address bar.
  3. Log in. Use username (blank) and password (created during first setup).
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the UniFi Express Wi-Fi name and password

  1. Log in to the Ubiquiti UniFi Express admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Ubiquiti UniFi Express

Hold the reset button for 10 to 15 seconds while the UniFi Express is on. When the lights flash, release it and wait about two minutes. The login returns to (blank) / (created during first setup) at 192.168.1.1.

Default network settings

LAN IP (gateway)192.168.1.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.1.1 to 192.168.1.254
BrandUbiquiti (USA)

Ubiquiti UniFi Express FAQ

What is the Ubiquiti UniFi Express default IP address?

The Ubiquiti UniFi Express uses 192.168.1.1 by default.

What is the Ubiquiti UniFi Express default password?

Out of the box, the Ubiquiti UniFi Express uses username (blank) with password (created during first setup), which differs from the usual Ubiquiti default (ubnt / ubnt). If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Ubiquiti UniFi Express?

With the UniFi Express powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.1 to sign in with the defaults and set it up again.