Ubiquiti UniFi Security Gateway Login
Default IP address, username & password · Updated
The Ubiquiti UniFi Security Gateway uses 192.168.1.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.1 in a browser and sign in with username "ubnt" and password "ubnt". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.1.1
- Username
ubnt- Password
ubnt
The Ubiquiti UniFi Security Gateway uses 192.168.1.1 as its default admin address. Open http://192.168.1.1 while connected to the router and sign in with the username ubnt and password ubnt.
EdgeRouter and older UniFi gear use ubnt/ubnt; UniFi OS consoles are set up through the UniFi app or setup.ui.com.
How to log in to the Ubiquiti UniFi Security Gateway
- Connect to the Ubiquiti UniFi Security Gateway. Connect your device to the Ubiquiti UniFi Security Gateway by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.1.1 into your browser's address bar.
- Log in. Use username ubnt and password ubnt.
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the UniFi Security Gateway Wi-Fi name and password
- Log in to the Ubiquiti UniFi Security Gateway admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the Ubiquiti UniFi Security Gateway
Hold the reset button for 10 to 15 seconds while the UniFi Security Gateway is on. When the lights flash, release it and wait about two minutes. The login returns to ubnt / ubnt at 192.168.1.1.
Default network settings
| LAN IP (gateway) | 192.168.1.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.1.1 to 192.168.1.254 |
| Brand | Ubiquiti (USA) |
Ubiquiti UniFi Security Gateway FAQ
What is the Ubiquiti UniFi Security Gateway default IP address?
The Ubiquiti UniFi Security Gateway uses 192.168.1.1 by default.
What is the Ubiquiti UniFi Security Gateway default password?
Out of the box, the Ubiquiti UniFi Security Gateway uses username ubnt with password ubnt. If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the Ubiquiti UniFi Security Gateway?
With the UniFi Security Gateway powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.1 to sign in with the defaults and set it up again.