AT&T Router Login
Default IP, username & password · Updated
To log in to an AT&T router, connect to its network and open http://192.168.1.254 in a browser. The default login is username blank (leave it empty) and password Device Access Code on the label. Model-specific logins for 4 AT&T routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.
- Default IP
- 192.168.1.254
- Username
(blank)- Password
(Device Access Code on the label)
To log in to a AT&T isp gateway, connect to its network and open http://192.168.1.254 in your browser. The default username is (blank) and the default password is (Device Access Code on the label).
AT&T gateways ask for the Device Access Code printed on the side label when you change settings.
How to log in to your AT&T router
- Connect to your AT&T network. Join the AT&T Wi-Fi network or connect with an Ethernet cable.
- Open the login page. Open a browser and go to http://192.168.1.254.
- Sign in. Enter the username (blank) and password (Device Access Code on the label). If these do not work, check the label on the bottom of your AT&T router.
- Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.
AT&T default passwords by model
| Model | IP address | Username | Password |
|---|---|---|---|
| BGW210-700 | 192.168.1.254 | (blank) | (Device Access Code on the label) |
| BGW320-500 | 192.168.1.254 | (blank) | (Device Access Code on the label) |
| NVG589 | 192.168.1.254 | (blank) | (Device Access Code on the label) |
| Pace 5268AC | 192.168.1.254 | (blank) | (Device Access Code on the label) |
IP addresses used by AT&T
Change the Wi-Fi password on a AT&T router
- Log in at
http://192.168.1.254. - Go to the Wireless / Wi-Fi settings.
- Select WPA2 or WPA3 and type a new password.
- Save and reconnect your devices.
Reset a AT&T router to factory settings
If you forgot the AT&T admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with (blank) / (Device Access Code on the label) at 192.168.1.254. Read the full guide.
AT&T router login FAQ
What is the default IP address for AT&T routers?
Most AT&T routers use 192.168.1.254.
What is the default AT&T router username and password?
Username: (blank), password: (Device Access Code on the label). AT&T gateways ask for the Device Access Code printed on the side label when you change settings.
How do I reset my AT&T router?
With the AT&T router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.1.254 with (blank) / (Device Access Code on the label) and may need your AT&T account details to reconnect.
How do I change the Wi-Fi password on a AT&T router?
Log in at http://192.168.1.254, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.