AT&T BGW210-700 Login
Default IP address, username & password · Updated
The AT&T BGW210-700 uses 192.168.1.254 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.254 in a browser and sign in with username blank (leave it empty) and password Device Access Code on the label. If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.1.254
- Username
(blank)- Password
(Device Access Code on the label)
The AT&T BGW210-700 uses 192.168.1.254 as its default admin address. Open http://192.168.1.254 while connected to the router and sign in with the username (blank) and password (Device Access Code on the label).
AT&T gateways ask for the Device Access Code printed on the side label when you change settings.
How to log in to the AT&T BGW210-700
- Connect to the AT&T BGW210-700. Connect your device to the AT&T BGW210-700 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.1.254 into your browser's address bar.
- Log in. Use username (blank) and password (Device Access Code on the label).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the BGW210-700 Wi-Fi name and password
- Log in to the AT&T BGW210-700 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the AT&T BGW210-700
Hold the reset button for 10 to 15 seconds while the BGW210-700 is on. When the lights flash, release it and wait about two minutes. The login returns to (blank) / (Device Access Code on the label) at 192.168.1.254.
Default network settings
| LAN IP (gateway) | 192.168.1.254 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.1.1 to 192.168.1.254 |
| Brand | AT&T (USA) |
AT&T BGW210-700 FAQ
What is the AT&T BGW210-700 default IP address?
The AT&T BGW210-700 uses 192.168.1.254 by default.
What is the AT&T BGW210-700 default password?
Out of the box, the AT&T BGW210-700 uses username (blank) with password (Device Access Code on the label). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the AT&T BGW210-700?
With the BGW210-700 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.254 to sign in with the defaults and set it up again.