BT Smart Hub 2 Login
Default IP address, username & password · Updated
The BT Smart Hub 2 uses 192.168.1.254 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.254 in a browser and sign in with username "admin" and password the one printed on the router label. If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.1.254
- Username
admin- Password
(printed on the router label)
The BT Smart Hub 2 uses 192.168.1.254 as its default admin address. Open http://192.168.1.254 while connected to the router and sign in with the username admin and password (printed on the router label).
How to log in to the BT Smart Hub 2
- Connect to the BT Smart Hub 2. Connect your device to the BT Smart Hub 2 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.1.254 into your browser's address bar.
- Log in. Use username admin and password (printed on the router label).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the Smart Hub 2 Wi-Fi name and password
- Log in to the BT Smart Hub 2 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the BT Smart Hub 2
Hold the reset button for 10 to 15 seconds while the Smart Hub 2 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / (printed on the router label) at 192.168.1.254.
Default network settings
| LAN IP (gateway) | 192.168.1.254 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.1.1 to 192.168.1.254 |
| Brand | BT (UK) |
BT Smart Hub 2 FAQ
What is the BT Smart Hub 2 default IP address?
The BT Smart Hub 2 uses 192.168.1.254 by default.
What is the BT Smart Hub 2 default password?
Out of the box, the BT Smart Hub 2 uses username admin with password (printed on the router label). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the BT Smart Hub 2?
With the Smart Hub 2 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.254 to sign in with the defaults and set it up again.