Technicolor TG789vac Login
Default IP address, username & password · Updated
The Technicolor TG789vac uses 192.168.1.254 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.1.254 in a browser and sign in with username "admin" and password the one printed on the router label. If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.1.254
- Username
admin- Password
(printed on the router label)
The Technicolor TG789vac uses 192.168.1.254 as its default admin address. Open http://192.168.1.254 while connected to the router and sign in with the username admin and password (printed on the router label).
How to log in to the Technicolor TG789vac
- Connect to the Technicolor TG789vac. Connect your device to the Technicolor TG789vac by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.1.254 into your browser's address bar.
- Log in. Use username admin and password (printed on the router label).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the TG789vac Wi-Fi name and password
- Log in to the Technicolor TG789vac admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the Technicolor TG789vac
Hold the reset button for 10 to 15 seconds while the TG789vac is on. When the lights flash, release it and wait about two minutes. The login returns to admin / (printed on the router label) at 192.168.1.254.
Default network settings
| LAN IP (gateway) | 192.168.1.254 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.1.1 to 192.168.1.254 |
| Brand | Technicolor (France) |
Technicolor TG789vac FAQ
What is the Technicolor TG789vac default IP address?
The Technicolor TG789vac uses 192.168.1.254 by default.
What is the Technicolor TG789vac default password?
Out of the box, the Technicolor TG789vac uses username admin with password (printed on the router label), which differs from the usual Technicolor default (admin / admin). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the Technicolor TG789vac?
With the TG789vac powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.1.254 to sign in with the defaults and set it up again.