Fujitsu Siemens Default Password

Servers, Terminals & Hardware · 2 default logins · Updated

Quick answer

The most common default login for Fujitsu Siemens devices is username blank (leave it empty) and password "connect". There are 2 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

This page lists the factory default usernames and passwords for Fujitsu Siemens servers, remote-management controllers, terminal servers and BIOS. Fujitsu Siemens has 2 documented default logins. The most common username is (blank) and the most common password is connect.

Fujitsu Siemens default username and password list

#UsernamePasswordTypeNotes
1(blank)connectProduct-specific—
2manage!manageProduct-specific—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Fujitsu Siemens defaults tell you

  • 1 entry has no username: type only the password.
  • Fujitsu Siemens has the 111th longest default-credential list of the 283 vendors in our database.

Fujitsu Siemens default login at a glance

BrandFujitsu Siemens
CategoryServers, Terminals & Hardware
Known default logins2
Unique usernames2
Unique passwords2
Blank passwords0 of 2
List size rank111th of 283 brands
Shares a login withNo other brand

How to log in to a Fujitsu Siemens server or hardware device

  • Many Fujitsu Siemens models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
  • Fujitsu Siemens admins often use bIOS/firmware setup screen at boot
  • With Fujitsu Siemens hardware, serial console or terminal server

Which login to try, in order:

  1. First, try username (blank) with password connect.
  2. If that fails, use username manage with password !manage.

Forgot the password? Reset your Fujitsu Siemens server or hardware device

  1. On the Fujitsu Siemens server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
  2. For management controllers: use the host OS utility or the controller’s physical reset.
  3. Follow the vendor’s documented recovery procedure.

Why you should change the Fujitsu Siemens default password

  • With Fujitsu Siemens defaults unchanged, out-of-band controllers give full power, console and reinstall access.
  • If a Fujitsu Siemens server keeps its factory login: firmware can be modified to persist malware.
  • On an unprotected Fujitsu Siemens device, terminal servers expose consoles of many other devices.

How to change it: Replace (blank) / connect on every Fujitsu Siemens device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.

Fujitsu Siemens default password FAQ

What is the default password for Fujitsu Siemens?

The most common default is "connect". All 2 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Fujitsu Siemens username?

Common default usernames are "(blank)", "manage".

How do I log in to a Fujitsu Siemens server or hardware device?

Many Fujitsu Siemens models use remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username (blank) with password connect.

The Fujitsu Siemens default password doesn't work: what now?

If (blank) / connect is rejected, someone changed it after installation. On the Fujitsu Siemens server, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.

Is it safe to keep the Fujitsu Siemens default password?

No. With Fujitsu Siemens defaults unchanged, out-of-band controllers give full power, console and reinstall access. Replace (blank) / connect on every Fujitsu Siemens device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.