HP Default Password
Servers, Terminals & Hardware · 9 default logins · Updated
The most common default login for HP devices is username "admin" and password blank (leave it empty). There are 9 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
(blank)- Known combinations
- 9
Looking for the default login of a HP server or hardware device? Below are the documented factory credentials. HP has 9 documented default logins. The most common username is admin (4 entries) and the most common password is (blank) (2 entries).
HP default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | (blank) | (blank) | Blank password | — |
| 2 | (blank) | AUTORAID | Product-specific | — |
| 3 | Administrator | admin | Common word | — |
| 4 | Factory | 56789 | Numeric PIN | — |
| 5 | admin | !admin | Product-specific | — |
| 6 | admin | (blank) | Blank password | — |
| 7 | admin | admin | Same as username | — |
| 8 | admin | isee | Product-specific | — |
| 9 | root | password | Common word | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these HP defaults tell you
- 2 of 9 entries use a blank password: leave the password field empty.
- 2 entries have no username: type only the password.
- 1 uses the username as the password (for example admin / admin).
- 1 is a numeric PIN, typical for keypads and service menus.
- HP has the 20th longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
HP default login at a glance
| Brand | HP |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 9 |
| Unique usernames | 5 |
| Unique passwords | 7 |
| Blank passwords | 2 of 9 |
| List size rank | 20th of 283 brands |
| Shares a login with | 117 other brands |
How to log in to a HP server or hardware device
- On HP equipment, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- For a HP server, bIOS/firmware setup screen at boot
- Many HP models use serial console or terminal server
Which login to try, in order:
- First, try username (blank) with password (blank).
- If that fails, use username (blank) with password AUTORAID.
- Next, try username Administrator with password admin.
- Another option is username Factory with password 56789.
- You can also try username admin with password !admin.
- Last, try username admin with password (blank).
Forgot the password? Reset your HP server or hardware device
- For HP units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the HP default password
- On an unprotected HP device, out-of-band controllers give full power, console and reinstall access.
- Risk for HP owners: firmware can be modified to persist malware.
- With HP defaults unchanged, terminal servers expose consoles of many other devices.
How to change it: Replace (blank) / (blank) on every HP device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
HP default password FAQ
What is the default password for HP?
The most common default is "(blank)". All 9 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default HP username?
Common default usernames are "admin", "(blank)", "Administrator", "Factory".
How do I log in to a HP server or hardware device?
On HP equipment, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username (blank) with password (blank).
The HP default password doesn't work: what now?
If (blank) / (blank) is rejected, someone changed it after installation. For HP units, for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the HP default password?
No. On an unprotected HP device, out-of-band controllers give full power, console and reinstall access. Replace (blank) / (blank) on every HP device: set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.