Cyclades Default Password
Servers, Terminals & Hardware · 3 default logins · Updated
The most common default login for Cyclades devices is username "root" and password blank (leave it empty). There are 3 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
root- Most common password
(blank)- Known combinations
- 3
Use this reference to log in to a Cyclades server or hardware device that is still on its factory settings. Cyclades has 3 documented default logins. The most common username is root (2 entries) and the most common password is (blank).
Cyclades default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | root | (blank) | Blank password | — |
| 2 | root | tslinux | Product-specific | — |
| 3 | super | surt | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Cyclades defaults tell you
- 1 of 3 entries use a blank password: leave the password field empty.
- Cyclades has the 81st longest default-credential list of the 283 vendors in our database.
- 8 other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Cyclades default login at a glance
| Brand | Cyclades |
|---|---|
| Category | Servers, Terminals & Hardware |
| Known default logins | 3 |
| Unique usernames | 2 |
| Unique passwords | 3 |
| Blank passwords | 1 of 3 |
| List size rank | 81st of 283 brands |
| Shares a login with | 8 other brands |
How to log in to a Cyclades server or hardware device
- On Cyclades equipment, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH
- For a Cyclades server, bIOS/firmware setup screen at boot
- Many Cyclades models use serial console or terminal server
Which login to try, in order:
- First, try username root with password (blank).
- If that fails, use username root with password tslinux.
- Next, try username super with password surt.
Forgot the password? Reset your Cyclades server or hardware device
- Cyclades: for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper.
- For management controllers: use the host OS utility or the controller’s physical reset.
- Follow the vendor’s documented recovery procedure.
Why you should change the Cyclades default password
- Risk for Cyclades owners: out-of-band controllers give full power, console and reinstall access.
- With Cyclades defaults unchanged, firmware can be modified to persist malware.
- If a Cyclades server keeps its factory login: terminal servers expose consoles of many other devices.
How to change it: Cyclades recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated. Create a strong replacement with our password generator.
Cyclades default password FAQ
What is the default password for Cyclades?
The most common default is "(blank)". All 3 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Cyclades username?
Common default usernames are "root", "super".
How do I log in to a Cyclades server or hardware device?
On Cyclades equipment, remote-management controller (iLO, DRAC, RSA, ALOM) via web or SSH. On the login screen enter username root with password (blank).
The Cyclades default password doesn't work: what now?
If root / (blank) is rejected, someone changed it after installation. Cyclades: for BIOS passwords: remove the CMOS battery or use the board’s clear-password jumper. For management controllers: use the host OS utility or the controller’s physical reset.
Is it safe to keep the Cyclades default password?
No. Risk for Cyclades owners: out-of-band controllers give full power, console and reinstall access. Cyclades recommends changing the factory login at first setup. Set unique passwords on every BIOS and management controller, put management ports on a separate network and keep firmware updated.