Sky Router Login

Default IP, username & password · Updated

Quick answer

To log in to a Sky router, connect to its network and open http://192.168.0.1 in a browser. The default login is username "admin" and password "sky". Model-specific logins for 3 Sky routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.

To log in to a Sky isp router, connect to its network and open http://192.168.0.1 in your browser. The default username is admin and the default password is sky.

How to log in to your Sky router

  1. Connect to your Sky network. Join the Sky Wi-Fi network or connect with an Ethernet cable.
  2. Open the login page. Open a browser and go to http://192.168.0.1.
  3. Sign in. Enter the username admin and password sky. If these do not work, check the label on the bottom of your Sky router.
  4. Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.

Sky default passwords by model

ModelIP addressUsernamePassword
Sky Broadband Hub192.168.0.1adminsky
Sky Hub SR102192.168.0.1adminsky
Sky Hub SR203192.168.0.1adminsky

IP addresses used by Sky

Change the Wi-Fi password on a Sky router

  1. Log in at http://192.168.0.1.
  2. Go to the Wireless / Wi-Fi settings.
  3. Select WPA2 or WPA3 and type a new password.
  4. Save and reconnect your devices.

Reset a Sky router to factory settings

If you forgot the Sky admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / sky at 192.168.0.1. Read the full guide.

Sky router login FAQ

What is the default IP address for Sky routers?

Most Sky routers use 192.168.0.1.

What is the default Sky router username and password?

Username: admin, password: sky. Some models and ISP versions use a unique password printed on the label.

How do I reset my Sky router?

With the Sky router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.0.1 with admin / sky and may need your Sky account details to reconnect.

How do I change the Wi-Fi password on a Sky router?

Log in at http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.