Telstra Router Login
Default IP, username & password · Updated
To log in to a Telstra router, connect to its network and open http://192.168.0.1 in a browser. The default login is username "admin" and password "Telstra". Model-specific logins for 2 Telstra routers are listed below. If the defaults don't work, they were changed: reset the router to restore them.
- Default IP
- 192.168.0.1
- Username
admin- Password
Telstra
To log in to a Telstra isp router, connect to its network and open http://192.168.0.1 in your browser. The default username is admin and the default password is Telstra.
How to log in to your Telstra router
- Connect to your Telstra network. Join the Telstra Wi-Fi network or connect with an Ethernet cable.
- Open the login page. Open a browser and go to http://192.168.0.1.
- Sign in. Enter the username admin and password Telstra. If these do not work, check the label on the bottom of your Telstra router.
- Configure and save. Change the Wi-Fi name, password and admin password, then click Save or Apply.
Telstra default passwords by model
| Model | IP address | Username | Password |
|---|---|---|---|
| Smart Modem Gen 2 | 192.168.0.1 | admin | Telstra |
| Smart Modem Gen 3 | 192.168.0.1 | admin | Telstra |
IP addresses used by Telstra
Change the Wi-Fi password on a Telstra router
- Log in at
http://192.168.0.1. - Go to the Wireless / Wi-Fi settings.
- Select WPA2 or WPA3 and type a new password.
- Save and reconnect your devices.
Reset a Telstra router to factory settings
If you forgot the Telstra admin password, hold the Reset button for 10–15 seconds with the router powered on. After it restarts, log in with admin / Telstra at 192.168.0.1. Read the full guide.
Telstra router login FAQ
What is the default IP address for Telstra routers?
Most Telstra routers use 192.168.0.1.
What is the default Telstra router username and password?
Username: admin, password: Telstra. Some models and ISP versions use a unique password printed on the label.
How do I reset my Telstra router?
With the Telstra router switched on, press and hold its Reset button for 10 to 15 seconds until the lights blink, then wait a couple of minutes for it to restart. Everything returns to factory defaults, so you'll sign in again at 192.168.0.1 with admin / Telstra and may need your Telstra account details to reconnect.
How do I change the Wi-Fi password on a Telstra router?
Log in at http://192.168.0.1, open the Wireless/Wi-Fi settings, enter a new WPA2 or WPA3 password and click Save.