Inteno Default Password

Routers & Modems · 4 default logins · Updated

Quick answer

The most common default login for Inteno devices is username "user" and password "admin". There are 4 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Inteno ships many of its routers, modems and gateways with publicly known default credentials, collected below. Inteno has 4 documented default logins. The most common username is user (2 entries) and the most common password is admin (2 entries).

Inteno default username and password list

#UsernamePasswordTypeNotes
1useruserSame as usernameDG150, DG150A, DG150B, DG200AL, EG300: web UI usually 192.168.1.1 (source: portforward.com)
2useradminCommon wordDG200A (source: setuprouter.com)
3adminadminSame as usernameFG500, X5669A (source: setuprouter.com)
4admin(printed on the router label)Product-specificDG400 Prime and other ISP units; some models use 10.0.0.1

"(blank)" means leave the field empty. Source: manufacturer manuals and public router databases (listed in the Notes column). Defaults can differ by model and firmware: check the label on your device.

What these Inteno defaults tell you

  • 2 use the username as the password (for example user / user).
  • 4 entries include a note on the product, access method or privilege level: check the Notes column.
  • Inteno has the 63rd longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Same as username2
Common word1
Product-specific1

Inteno default login at a glance

BrandInteno
CategoryRouters & Modems
Known default logins4
Unique usernames2
Unique passwords3
Blank passwords0 of 4
List size rank63rd of 283 brands
Shares a login with65 other brands

How to log in to a Inteno router or modem

  • Inteno admins often use web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device
  • With Inteno hardware, telnet or SSH on older or business models
  • On Inteno equipment, mobile app on newer consumer models

Which login to try, in order:

  1. First, try username user with password user (DG150, DG150A, DG150B, DG200AL, EG300: web UI usually 192.168.1.1 (source: portforward.com)).
  2. If that fails, use username user with password admin (DG200A (source: setuprouter.com)).
  3. Next, try username admin with password admin (FG500, X5669A (source: setuprouter.com)).
  4. Another option is username admin with password (printed on the router label) (DG400 Prime and other ISP units; some models use 10.0.0.1).

Forgot the password? Reset your Inteno router or modem

  1. Keep the device powered on.
  2. Press and hold the recessed Reset button for 10–15 seconds with a paperclip.
  3. Release when the lights flash and wait 2–3 minutes for the reboot.
  4. Log in again at the default IP with the default credentials.

Why you should change the Inteno default password

  • On an unprotected Inteno device, anyone on your Wi-Fi can change DNS settings and redirect you to fake websites.
  • Risk for Inteno owners: botnets such as Mirai scan the internet for routers with default logins.
  • With Inteno defaults unchanged, attackers can open ports, read connected devices and capture traffic.

How to change it: Inteno recommends changing the factory login at first setup. Open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too. Create a strong replacement with our password generator.

Inteno default password FAQ

What is the default password for Inteno?

The most common default is "admin". All 4 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Inteno username?

Common default usernames are "user", "admin".

How do I log in to a Inteno router or modem?

Inteno admins often use web browser: open the gateway IP (usually 192.168.1.1, 192.168.0.1 or 10.0.0.1) while connected to the device. On the login screen enter username user with password user (DG150, DG150A, DG150B, DG200AL, EG300: web UI usually 192.168.1.1 (source: portforward.com)).

The Inteno default password doesn't work: what now?

If user / user is rejected, someone changed it after installation. Keep the device powered on. Press and hold the recessed Reset button for 10–15 seconds with a paperclip.

Is it safe to keep the Inteno default password?

No. On an unprotected Inteno device, anyone on your Wi-Fi can change DNS settings and redirect you to fake websites. Inteno recommends changing the factory login at first setup. Open the admin page, go to System / Administration / Management and set a new admin password of at least 12 characters. Then change the Wi-Fi password too.