3Com Default Password

Switches & Enterprise Networking · 35 default logins · Updated

Quick answer

The most common default login for 3Com devices is username blank (leave it empty) and password blank (leave it empty). There are 35 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Use this reference to log in to a 3Com switch or network device that is still on its factory settings. 3Com has 35 documented default logins. The most common username is (blank) (8 entries) and the most common password is (blank) (6 entries).

3Com default username and password list

#UsernamePasswordTypeNotes
13comcsoRIP000Product-specificResets all passwords to defaults
2(blank)12345Numeric PIN—
3(blank)1234adminProduct-specific—
4(blank)(blank)Blank password—
5(blank)ANYCOMProduct-specific—
6(blank)ILMIProduct-specific—
7(blank)PASSWORDCommon word—
8(blank)adminCommon word—
9(blank)comcomcomProduct-specific—
10AdminAdminSame as username—
11Administrator(blank)Blank password—
12AdministratoradminCommon word—
13Type User: FORCE(blank)Blank password—
14UserPasswordCommon word—
15adm(blank)Blank password—
16admin1234adminProduct-specific—
17admin(blank)Blank password—
18adminadminSame as username—
19admincomcomcomProduct-specific—
20adminpasswordCommon word—
21adminsynnetProduct-specific—
22adminttdadminttdSame as username—
23debugsynnetProduct-specific—
24defugsynnetProduct-specific—
25managermanagerSame as username—
26monitormonitorSame as username—
27noneadminCommon word—
28readsynnetProduct-specific—
29recoverrecoverSame as usernamehttp://support.3com.com/infodeli/tools/switches/ss3/4900/dha1770-0aaa04/htm/support/problemsolving/cliproblems.htm
30recoveryrecoverySame as usernameUnit must be powered off
31root!rootProduct-specifichttp://support.3com.com/infodeli/tools/remote/ocradsl/20/812_cli20.pdfhttp://support.3com.com/infodeli/tools/remote/ocremote/brouters/840/2sysadmin.htm
32securitysecuritySame as username—
33tech(blank)Blank password—
34techtechSame as username—
35writesynnetProduct-specific—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these 3Com defaults tell you

  • 6 of 35 entries use a blank password: leave the password field empty.
  • 8 entries have no username: type only the password.
  • 9 use the username as the password (for example Admin / Admin).
  • 1 is a numeric PIN, typical for keypads and service menus.
  • 4 entries include a note on the product, access method or privilege level: check the Notes column.
  • 3Com has the 5th longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Product-specific13
Same as username9
Blank password6
Common word6

3Com default login at a glance

Brand3Com
CategorySwitches & Enterprise Networking
Known default logins35
Unique usernames21
Unique passwords21
Blank passwords6 of 35
List size rank5th of 283 brands
Shares a login with139 other brands

How to log in to a 3Com switch or network device

  • 3Com admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • With 3Com hardware, sSH or Telnet to the management IP
  • On 3Com equipment, web management interface (HTTP/HTTPS) on managed models
  • For a 3Com switch, sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username 3comcso with password RIP000 (Resets all passwords to defaults).
  2. If that fails, use username (blank) with password 12345.
  3. Next, try username (blank) with password 1234admin.
  4. Another option is username (blank) with password (blank).
  5. You can also try username (blank) with password ANYCOM.
  6. Last, try username (blank) with password ILMI.

Forgot the password? Reset your 3Com switch or network device

  1. Connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the 3Com default password

  • Risk for 3Com owners: full control of VLANs, routing and traffic mirroring.
  • With 3Com defaults unchanged, default SNMP community strings ("public"/"private") leak or change configuration.
  • If a 3Com switch keeps its factory login: telnet sends credentials in clear text: use SSH.

How to change it: Replace 3comcso / RIP000 on every 3Com device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

3Com default password FAQ

What is the default password for 3Com?

The most common default is "(blank)". All 35 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default 3Com username?

Common default usernames are "(blank)", "admin", "Administrator", "tech".

How do I log in to a 3Com switch or network device?

3Com admins often use serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username 3comcso with password RIP000 (Resets all passwords to defaults).

The 3Com default password doesn't work: what now?

If 3comcso / RIP000 is rejected, someone changed it after installation. Connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the 3Com default password?

No. Risk for 3Com owners: full control of VLANs, routing and traffic mirroring. Replace 3comcso / RIP000 on every 3Com device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.