Nortel Default Password

Switches & Enterprise Networking · 50 default logins · Updated

Quick answer

The most common default login for Nortel devices is username blank (leave it empty) and password blank (leave it empty). There are 50 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.

Looking for the default login of a Nortel switch or network device? Below are the documented factory credentials. Nortel has 50 documented default logins. The most common username is (blank) (9 entries) and the most common password is (blank) (4 entries).

Nortel default username and password list

#UsernamePasswordTypeNotes
1266344266344Same as username—
2(blank)0Numeric PIN—
3(blank)(blank)Blank password—
4(blank)l1Product-specific—
5(blank)l2Product-specific—
6(blank)roProduct-specific—
7(blank)rwProduct-specific—
8(blank)rwaProduct-specific—
9(blank)secureProduct-specific—
10(blank)266344Numeric PIN—
11Manager(blank)Blank password—
12admin000000Numeric PINhttp://support.avaya.com/css/P8/documents/100097575
13admin(blank)Blank passwordhttp://support.avaya.com/css/P8/documents/100097575
14adminadminSame as username—
15adminadmin000Product-specific—
16adminrootCommon word—
17adminsetupProduct-specific—
18administratorPlsChgMe!Product-specific—
19ccrusrccrusrSame as username—
20conferencingadminCommon wordhttp://support.avaya.com/css/P8/documents/100097575
21debuggubedProduct-specifichttp://support.avaya.com/css/P8/documents/100097575
22distribdistrib0Product-specific—
23disttech4tasProduct-specific—
24disttechdisttechSame as username—
25disttechetasProduct-specific—
26l2l2Same as username—
27l3l3Same as username—
28login0Numeric PINAUTH codes in LD 8
29login0000Numeric PIN—
30login1111Numeric PINAUTH codes in LD 8
31login8429Numeric PINAUTH codes in LD 8
32maintmaintSame as username—
33maintntacdmaxProduct-specific—
34mlusrmlusrSame as username—
35roroSame as username—
36root3ep5w2uProduct-specific—
37rwrwSame as username—
38rwarwaSame as username—
39servicesmileProduct-specific—
40spcl0Numeric PINAUTH codes in LD 8
41spcl0000Numeric PIN—
42supervisorPlsChgMe!Product-specific—
43supervisorvisorProduct-specific—
44sysadminnortelVendor name—
45systemadminpwdProduct-specific—
46tasmantasmannetProduct-specific—
47trmcnfgtrmcnfgSame as username—
48user(blank)Blank password—
49useruserSame as username—
50useruser0000Product-specific—

"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.

What these Nortel defaults tell you

  • 4 of 50 entries use a blank password: leave the password field empty.
  • 9 entries have no username: type only the password.
  • 13 use the username as the password (for example 266344 / 266344).
  • 9 are numeric PINs, typical for keypads and service menus.
  • 8 entries include a note on the product, access method or privilege level: check the Notes column.
  • Nortel has the 3rd longest default-credential list of the 283 vendors in our database.
  • 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Product-specific21
Same as username13
Numeric PIN9
Blank password4

Nortel default login at a glance

BrandNortel
CategorySwitches & Enterprise Networking
Known default logins50
Unique usernames27
Unique passwords37
Blank passwords4 of 50
List size rank3rd of 283 brands
Shares a login with118 other brands

How to log in to a Nortel switch or network device

  • With Nortel hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
  • On Nortel equipment, sSH or Telnet to the management IP
  • For a Nortel switch, web management interface (HTTP/HTTPS) on managed models
  • Many Nortel models use sNMP (read/write community strings) for monitoring

Which login to try, in order:

  1. First, try username 266344 with password 266344.
  2. If that fails, use username (blank) with password 0.
  3. Next, try username (blank) with password (blank).
  4. Another option is username (blank) with password l1.
  5. You can also try username (blank) with password l2.
  6. Last, try username (blank) with password ro.

Forgot the password? Reset your Nortel switch or network device

  1. Nortel: connect a console cable and power-cycle the device.
  2. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
  3. Skip or erase the startup configuration and reboot.
  4. Log in with the factory credentials and set a new password before saving.

Why you should change the Nortel default password

  • With Nortel defaults unchanged, full control of VLANs, routing and traffic mirroring.
  • If a Nortel switch keeps its factory login: default SNMP community strings ("public"/"private") leak or change configuration.
  • On an unprotected Nortel device, telnet sends credentials in clear text: use SSH.

How to change it: Replace 266344 / 266344 on every Nortel device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration. Create a strong replacement with our password generator.

Nortel default password FAQ

What is the default password for Nortel?

The most common default is "(blank)". All 50 known combinations are listed in the table above: the right one depends on the product and firmware.

What is the default Nortel username?

Common default usernames are "(blank)", "admin", "login", "disttech".

How do I log in to a Nortel switch or network device?

With Nortel hardware, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username 266344 with password 266344.

The Nortel default password doesn't work: what now?

If 266344 / 266344 is rejected, someone changed it after installation. Nortel: connect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.

Is it safe to keep the Nortel default password?

No. With Nortel defaults unchanged, full control of VLANs, routing and traffic mirroring. Replace 266344 / 266344 on every Nortel device: from the CLI enter configuration mode, set a new enable/admin secret and user password, disable Telnet in favour of SSH, change SNMP communities and save the running configuration.