Alteon Default Password
Switches & Enterprise Networking · 3 default logins · Updated
The most common default login for Alteon devices is username "admin" and password blank (leave it empty). There are 3 known default combinations listed below; which one works depends on the model and firmware. Change the default password as soon as you sign in, because default logins are public and widely scanned for.
- Most common username
admin- Most common password
(blank)- Known combinations
- 3
Alteon ships many of its switches, enterprise routers and network equipment with publicly known default credentials, collected below. Alteon has 3 documented default logins. The most common username is admin (3 entries) and the most common password is (blank).
Alteon default username and password list
| # | Username | Password | Type | Notes |
|---|---|---|---|---|
| 1 | admin | (blank) | Blank password | — |
| 2 | admin | admin | Same as username | — |
| 3 | admin | linga | Product-specific | — |
"(blank)" means leave the field empty. Source: CIRT.net default password database (via SecLists, MIT). Defaults can differ by model and firmware: check the label on your device.
What these Alteon defaults tell you
- 1 of 3 entries use a blank password: leave the password field empty.
- 1 uses the username as the password (for example admin / admin).
- Alteon has the 73rd longest default-credential list of the 283 vendors in our database.
- 12+ other vendors use at least one of the same username/password pairs, which is why attackers try these combinations first.
Alteon default login at a glance
| Brand | Alteon |
|---|---|
| Category | Switches & Enterprise Networking |
| Known default logins | 3 |
| Unique usernames | 1 |
| Unique passwords | 3 |
| Blank passwords | 1 of 3 |
| List size rank | 73rd of 283 brands |
| Shares a login with | 82 other brands |
How to log in to a Alteon switch or network device
- On Alteon equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1)
- For a Alteon switch, sSH or Telnet to the management IP
- Many Alteon models use web management interface (HTTP/HTTPS) on managed models
- Alteon admins often use sNMP (read/write community strings) for monitoring
Which login to try, in order:
- First, try username admin with password (blank).
- If that fails, use username admin with password admin.
- Next, try username admin with password linga.
Forgot the password? Reset your Alteon switch or network device
- undefinedConnect a console cable and power-cycle the device.
- Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
- Skip or erase the startup configuration and reboot.
- Log in with the factory credentials and set a new password before saving.
Why you should change the Alteon default password
- undefinedfull control of VLANs, routing and traffic mirroring.
- undefineddefault SNMP community strings ("public"/"private") leak or change configuration.
- undefinedtelnet sends credentials in clear text: use SSH.
How to change it: Create a strong replacement with our password generator.
Alteon default password FAQ
What is the default password for Alteon?
The most common default is "(blank)". All 3 known combinations are listed in the table above: the right one depends on the product and firmware.
What is the default Alteon username?
The default username is "admin".
How do I log in to a Alteon switch or network device?
On Alteon equipment, serial console cable (RJ-45 or DB-9, typically 9600 baud, 8-N-1). On the login screen enter username admin with password (blank).
The Alteon default password doesn't work: what now?
If admin / (blank) is rejected, someone changed it after installation. undefinedConnect a console cable and power-cycle the device. Interrupt the boot sequence (Break key or the vendor’s mode button) to enter recovery / ROMMON mode.
Is it safe to keep the Alteon default password?
No. undefinedfull control of VLANs, routing and traffic mirroring. undefined