192.168.88.1 Admin Login
Updated
192.168.88.1 is a private IP address used as a router's admin page (default gateway). It is the default login address for MikroTik routers. To log in, connect to the router's network, open http://192.168.88.1 in a browser and sign in. The usual default sign-in is username "admin" and password blank (leave it empty), but check the sticker on your router. If the page won't load, your router uses a different IP.
Connect to your router's network first, then click:
192.168.88.1 is a private IPv4 address that routers, modems and other network devices use as their admin login address (default gateway). The factory address of MikroTik RouterOS devices such as the hAP and hEX series. You can open it in a browser (WebFig) or connect with WinBox.
192.168.88.1 is the default gateway for MikroTik. Type http://192.168.88.1 into your browser to open the router's settings page, where you can change the Wi-Fi password, network name (SSID), DNS and security options.
How to log in to 192.168.88.1
- Connect to the router network. Connect your phone or computer to the router's Wi-Fi or plug in an Ethernet cable. You must be on the same local network as 192.168.88.1.
- Open http://192.168.88.1. Open a browser and type http://192.168.88.1 into the address bar (not the search box), then press Enter.
- Enter the admin username and password. Enter the router's admin username and password. Common defaults for 192.168.88.1 are admin / (blank), or check the label on the router.
- Change your settings. Once you are logged in you can change the Wi-Fi name (SSID), Wi-Fi password, admin password, DNS, port forwarding and parental controls. Click Save/Apply when you are done.
192.168.88.1 default username and password
These are the factory login credentials for routers that use 192.168.88.1. If they don't work, the password was changed or your model uses a unique password printed on its label.
| Brand | Model | Username | Password |
|---|---|---|---|
| MikroTik | Most models | admin | (blank) |
| MikroTik | hAP ac2 | admin | (blank) |
| MikroTik | hAP ac lite | admin | (blank) |
| MikroTik | hAP ax3 | admin | (blank) |
| MikroTik | hEX RB750Gr3 | admin | (blank) |
| MikroTik | RB951Ui-2HnD | admin | (blank) |
| MikroTik | cAP ac | admin | (blank) |
192.168.88.1 not opening? Try this
- Check the IP: run
ipconfig(Windows) or open Wi-Fi details (phone/Mac) and confirm the Default Gateway is 192.168.88.1. How to find your router IP. - Type it correctly: numbers only, in the address bar, not
192168881,l92.l68.88.l,192,168,88,1. - Use http://: some routers don't accept https.
- Disconnect VPN / proxy: check with our proxy checker.
- Restart the router and try another browser.
- Still stuck? Read 11 fixes for router login problems.
How to change the Wi-Fi password at 192.168.88.1
- Log in at
http://192.168.88.1. - Open Wireless, Wi-Fi or WLAN settings (sometimes under Advanced).
- Choose WPA2-PSK (AES) or WPA3 security and enter a new password of at least 12 characters.
- Click Save / Apply and reconnect your devices. Tip: share the new password with a Wi-Fi QR code.
Forgot the 192.168.88.1 password? Reset the router
If you can't sign in at 192.168.88.1, press and hold the Reset button on the back of the router for 10 to 15 seconds while it's powered on. It restarts with its factory settings, so a MikroTik router comes back on 192.168.88.1 with admin / (blank). Your Wi-Fi name and password are reset too, so reconnect your devices afterwards. Full reset guide.
192.168.88.1 technical details
| IP address | 192.168.88.1 |
|---|---|
| Type | Private (RFC 1918), not reachable from the internet |
| Private range | 192.168.0.0 to 192.168.255.255 (192.168.0.0/16, 16-bit block (Class C private)) |
| Address class | Class C |
| Typical LAN network | 192.168.88.0/24 (subnet mask 255.255.255.0) |
| Usable host range | 192.168.88.1 to 192.168.88.254 |
| Broadcast address | 192.168.88.255 |
| Decimal / Hex | 3232258049 / 0xC0A85801 |
| Binary | 11000000.10101000.01011000.00000001 |
| Reverse DNS zone | 1.88.168.192.in-addr.arpa |
Calculate other ranges with the CIDR subnet calculator.
Common misspellings of 192.168.88.1
People often type these by mistake. They will not open your router: use 192.168.88.1 instead:
192.168.88.1: frequently asked questions
What is 192.168.88.1?
192.168.88.1 is a private IPv4 address in the 192.168.0.0/16 range reserved for local networks. The factory address of MikroTik RouterOS devices such as the hAP and hEX series. You can open it in a browser (WebFig) or connect with WinBox.
What is the default username and password for 192.168.88.1?
The most common combinations are admin / (blank). Many newer routers print a unique password on the label or ask you to create one during setup.
Why is 192.168.88.1 not opening?
Make sure you are connected to the router's network, type http://192.168.88.1 in the address bar, disable VPN/proxy, and confirm your router actually uses 192.168.88.1 by checking the default gateway with ipconfig (Windows) or your Wi-Fi settings.
How do I change my Wi-Fi password at 192.168.88.1?
Log in at http://192.168.88.1, open the Wireless or Wi-Fi section, enter a new password (WPA2/WPA3) and save. All devices will need to reconnect.
I forgot my 192.168.88.1 admin password. What now?
First try the defaults for routers that use 192.168.88.1 (admin / (blank)) and the password on the label. If someone changed it, a factory reset is the only way back in: hold the Reset button for 10 to 15 seconds with the router on, wait for it to restart, then open http://192.168.88.1 again. On MikroTik routers the button is a small pinhole on the back.
Is l92.l68.88.l the same as 192.168.88.1?
No. l92.l68.88.l is a typo: IP addresses contain only numbers and dots. Type 192.168.88.1 exactly.