MikroTik hAP ac lite Login
Default IP address, username & password · Updated
The MikroTik hAP ac lite uses 192.168.88.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.88.1 in a browser and sign in with username "admin" and password blank (leave it empty). If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.88.1
- Username
admin- Password
(blank)
The MikroTik hAP ac lite uses 192.168.88.1 as its default admin address. Open http://192.168.88.1 while connected to the router and sign in with the username admin and password (blank).
MikroTik RouterOS devices use admin with an empty password (newer units print a password on the label). You can also use WinBox.
How to log in to the MikroTik hAP ac lite
- Connect to the MikroTik hAP ac lite. Connect your device to the MikroTik hAP ac lite by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.88.1 into your browser's address bar.
- Log in. Use username admin and password (blank).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the hAP ac lite Wi-Fi name and password
- Log in to the MikroTik hAP ac lite admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the MikroTik hAP ac lite
Hold the reset button for 10 to 15 seconds while the hAP ac lite is on. When the lights flash, release it and wait about two minutes. The login returns to admin / (blank) at 192.168.88.1.
Default network settings
| LAN IP (gateway) | 192.168.88.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.88.1 to 192.168.88.254 |
| Brand | MikroTik (Latvia) |
MikroTik hAP ac lite FAQ
What is the MikroTik hAP ac lite default IP address?
The MikroTik hAP ac lite uses 192.168.88.1 by default.
What is the MikroTik hAP ac lite default password?
Out of the box, the MikroTik hAP ac lite uses username admin with password (blank). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the MikroTik hAP ac lite?
With the hAP ac lite powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.88.1 to sign in with the defaults and set it up again.