MikroTik RB951Ui-2HnD Login
Default IP address, username & password · Updated
The MikroTik RB951Ui-2HnD uses 192.168.88.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.88.1 in a browser and sign in with username "admin" and password blank (leave it empty). If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.88.1
- Username
admin- Password
(blank)
The MikroTik RB951Ui-2HnD uses 192.168.88.1 as its default admin address. Open http://192.168.88.1 while connected to the router and sign in with the username admin and password (blank).
MikroTik RouterOS devices use admin with an empty password (newer units print a password on the label). You can also use WinBox.
How to log in to the MikroTik RB951Ui-2HnD
- Connect to the MikroTik RB951Ui-2HnD. Connect your device to the MikroTik RB951Ui-2HnD by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.88.1 into your browser's address bar.
- Log in. Use username admin and password (blank).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the RB951Ui-2HnD Wi-Fi name and password
- Log in to the MikroTik RB951Ui-2HnD admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the MikroTik RB951Ui-2HnD
Hold the reset button for 10 to 15 seconds while the RB951Ui-2HnD is on. When the lights flash, release it and wait about two minutes. The login returns to admin / (blank) at 192.168.88.1.
Default network settings
| LAN IP (gateway) | 192.168.88.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.88.1 to 192.168.88.254 |
| Brand | MikroTik (Latvia) |
MikroTik RB951Ui-2HnD FAQ
What is the MikroTik RB951Ui-2HnD default IP address?
The MikroTik RB951Ui-2HnD uses 192.168.88.1 by default.
What is the MikroTik RB951Ui-2HnD default password?
Out of the box, the MikroTik RB951Ui-2HnD uses username admin with password (blank). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the MikroTik RB951Ui-2HnD?
With the RB951Ui-2HnD powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.88.1 to sign in with the defaults and set it up again.