MikroTik hAP ax3 Login
Default IP address, username & password · Updated
The MikroTik hAP ax3 uses 192.168.88.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.88.1 in a browser and sign in with username "admin" and password blank (leave it empty). If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.88.1
- Username
admin- Password
(blank)
The MikroTik hAP ax3 uses 192.168.88.1 as its default admin address. Open http://192.168.88.1 while connected to the router and sign in with the username admin and password (blank).
MikroTik RouterOS devices use admin with an empty password (newer units print a password on the label). You can also use WinBox.
How to log in to the MikroTik hAP ax3
- Connect to the MikroTik hAP ax3. Connect your device to the MikroTik hAP ax3 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.88.1 into your browser's address bar.
- Log in. Use username admin and password (blank).
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the hAP ax3 Wi-Fi name and password
- Log in to the MikroTik hAP ax3 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the MikroTik hAP ax3
Hold the reset button for 10 to 15 seconds while the hAP ax3 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / (blank) at 192.168.88.1.
Default network settings
| LAN IP (gateway) | 192.168.88.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.88.1 to 192.168.88.254 |
| Brand | MikroTik (Latvia) |
MikroTik hAP ax3 FAQ
What is the MikroTik hAP ax3 default IP address?
The MikroTik hAP ax3 uses 192.168.88.1 by default.
What is the MikroTik hAP ax3 default password?
Out of the box, the MikroTik hAP ax3 uses username admin with password (blank). If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the MikroTik hAP ax3?
With the hAP ax3 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.88.1 to sign in with the defaults and set it up again.