Tenda AC10 Login
Default IP address, username & password · Updated
The Tenda AC10 uses 192.168.0.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.0.1 in a browser and sign in with username "admin" and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.0.1
- Username
admin- Password
admin
The Tenda AC10 uses 192.168.0.1 as its default admin address. Open http://192.168.0.1 (or http://tendawifi.com) while connected to the router and sign in with the username admin and password admin.
Newer Tenda models have no default password; log in at tendawifi.com and set one.
How to log in to the Tenda AC10
- Connect to the Tenda AC10. Connect your device to the Tenda AC10 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.0.1 (or http://tendawifi.com) into your browser's address bar.
- Log in. Use username admin and password admin.
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the AC10 Wi-Fi name and password
- Log in to the Tenda AC10 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the Tenda AC10
Hold the reset button for 10 to 15 seconds while the AC10 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / admin at 192.168.0.1.
Default network settings
| LAN IP (gateway) | 192.168.0.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.0.1 to 192.168.0.254 |
| Brand | Tenda (China) |
Tenda AC10 FAQ
What is the Tenda AC10 default IP address?
The Tenda AC10 uses 192.168.0.1 by default. You can also open tendawifi.com.
What is the Tenda AC10 default password?
Out of the box, the Tenda AC10 uses username admin with password admin. If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the Tenda AC10?
With the AC10 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.0.1 to sign in with the defaults and set it up again.