Tenda Nova MW6 Login

Default IP address, username & password · Updated

Quick answer

The Tenda Nova MW6 uses 192.168.5.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.5.1 in a browser and sign in with username blank (leave it empty) and password created during first setup. If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Tenda Nova MW6 uses 192.168.5.1 as its default admin address. Open http://192.168.5.1 while connected to the router and sign in with the username (blank) and password (created during first setup).

Managed with the Tenda WiFi app.

Newer Tenda models have no default password; log in at tendawifi.com and set one.

How to log in to the Tenda Nova MW6

  1. Connect to the Tenda Nova MW6. Connect your device to the Tenda Nova MW6 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.5.1 into your browser's address bar.
  3. Log in. Use username (blank) and password (created during first setup).
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the Nova MW6 Wi-Fi name and password

  1. Log in to the Tenda Nova MW6 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Tenda Nova MW6

Hold the reset button for 10 to 15 seconds while the Nova MW6 is on. When the lights flash, release it and wait about two minutes. The login returns to (blank) / (created during first setup) at 192.168.5.1.

Default network settings

LAN IP (gateway)192.168.5.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.5.1 to 192.168.5.254
BrandTenda (China)

Tenda Nova MW6 FAQ

What is the Tenda Nova MW6 default IP address?

The Tenda Nova MW6 uses 192.168.5.1 by default.

What is the Tenda Nova MW6 default password?

Out of the box, the Tenda Nova MW6 uses username (blank) with password (created during first setup), which differs from the usual Tenda default (admin / admin). If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Tenda Nova MW6?

With the Nova MW6 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.5.1 to sign in with the defaults and set it up again.