Tenda F6 Login
Default IP address, username & password · Updated
The Tenda F6 uses 192.168.0.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.0.1 in a browser and sign in with username "admin" and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.
- IP address
- 192.168.0.1
- Username
admin- Password
admin
The Tenda F6 uses 192.168.0.1 as its default admin address. Open http://192.168.0.1 (or http://tendawifi.com) while connected to the router and sign in with the username admin and password admin.
Newer Tenda models have no default password; log in at tendawifi.com and set one.
How to log in to the Tenda F6
- Connect to the Tenda F6. Connect your device to the Tenda F6 by Wi-Fi or Ethernet cable.
- Open the admin page. Type http://192.168.0.1 (or http://tendawifi.com) into your browser's address bar.
- Log in. Use username admin and password admin.
- Secure the router. Change the admin password and the Wi-Fi password, then save.
Change the F6 Wi-Fi name and password
- Log in to the Tenda F6 admin panel.
- Open Wireless (or Wi-Fi Settings).
- Edit the network name (SSID) and set a strong WPA2/WPA3 password.
- Save, then reconnect your devices with the new password.
Factory reset the Tenda F6
Hold the reset button for 10 to 15 seconds while the F6 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / admin at 192.168.0.1.
Default network settings
| LAN IP (gateway) | 192.168.0.1 |
|---|---|
| Subnet mask | 255.255.255.0 |
| DHCP range (typical) | 192.168.0.1 to 192.168.0.254 |
| Brand | Tenda (China) |
Tenda F6 FAQ
What is the Tenda F6 default IP address?
The Tenda F6 uses 192.168.0.1 by default. You can also open tendawifi.com.
What is the Tenda F6 default password?
Out of the box, the Tenda F6 uses username admin with password admin. If those no longer work, the login was changed and a factory reset brings them back.
How do I factory reset the Tenda F6?
With the F6 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.0.1 to sign in with the defaults and set it up again.