Tenda AC1200 Login

Default IP address, username & password · Updated

Quick answer

The Tenda AC1200 uses 192.168.0.1 as its default login address. Connect to the router's Wi-Fi or plug in a cable, open http://192.168.0.1 in a browser and sign in with username "admin" and password "admin". If those details were changed and you can't remember them, a factory reset (holding the reset button) restores the defaults.

The Tenda AC1200 uses 192.168.0.1 as its default admin address. Open http://192.168.0.1 (or http://tendawifi.com) while connected to the router and sign in with the username admin and password admin.

Newer Tenda models have no default password; log in at tendawifi.com and set one.

How to log in to the Tenda AC1200

  1. Connect to the Tenda AC1200. Connect your device to the Tenda AC1200 by Wi-Fi or Ethernet cable.
  2. Open the admin page. Type http://192.168.0.1 (or http://tendawifi.com) into your browser's address bar.
  3. Log in. Use username admin and password admin.
  4. Secure the router. Change the admin password and the Wi-Fi password, then save.

Change the AC1200 Wi-Fi name and password

  1. Log in to the Tenda AC1200 admin panel.
  2. Open Wireless (or Wi-Fi Settings).
  3. Edit the network name (SSID) and set a strong WPA2/WPA3 password.
  4. Save, then reconnect your devices with the new password.

Factory reset the Tenda AC1200

Hold the reset button for 10 to 15 seconds while the AC1200 is on. When the lights flash, release it and wait about two minutes. The login returns to admin / admin at 192.168.0.1.

Default network settings

LAN IP (gateway)192.168.0.1
Subnet mask255.255.255.0
DHCP range (typical)192.168.0.1 to 192.168.0.254
BrandTenda (China)

Tenda AC1200 FAQ

What is the Tenda AC1200 default IP address?

The Tenda AC1200 uses 192.168.0.1 by default. You can also open tendawifi.com.

What is the Tenda AC1200 default password?

Out of the box, the Tenda AC1200 uses username admin with password admin. If those no longer work, the login was changed and a factory reset brings them back.

How do I factory reset the Tenda AC1200?

With the AC1200 powered on, hold its Reset button for 10 to 15 seconds until the lights change, then let it restart (about two minutes). Afterwards, reconnect and open http://192.168.0.1 to sign in with the defaults and set it up again.